Release Notes for VSM

Important Note

1. Starting from version 3.0.3, VS960HD will no longer support AAC audio decoding. Cameras using AAC audio format can record properly, but VisualStation cannot play AAC audio. It is recommended to change to another supported audio format under IP Camera > Edit > Device > Video.

Fixed Issues

1. Minor bug fixes.

Important Note

1. AXIS has updated their Barcode Reader into a new package that requires a paid license. Starting from this version, Surveillance Station will no longer support AXIS Barcode Reader as a transaction source in the Transactions application. (Learn more)

Compatibility and Installation

1. 1. VisualStation 3.0.1-3256 is only compatible with Surveillance Station 9.0.2-8054 and above.

Fixed Issues

1. Minor bug fixes.

Compatibility and Installation

1. Updated to be compatible with Surveillance Station 9.0
2. VisualStation 3.0.0-3243 is only compatible with Surveillance Station 9.0.0-6856 and above.
3. Certain management features will no longer be supported on VisualStation and Surveillance Station Local Display. (Learn more)
4. The Log application has removed the rule setting page and will log all actions from now on.

This version has been replaced by VS960HD 3.0.0-3243 to fix an issue where devices updated in intranet environments might be stuck on the power-on screen.

Compatibility and Installation

1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.
2. VisualStation 2.3.12-3191 is only compatible with Surveillance Station 8.2.11-7328 and above.
3. Updated to be compatible with Surveillance Station 8.2.11-7328.

Bug Fixed

1. Minor bug fixes.

Compatibility and Installation

1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.
2. VisualStation 2.3.11-3181 is only compatible with Surveillance Station 8.2.10-7310 and above.

Fixed Issues

1. Fixed an issue where live video might freeze if Live View Buffering is enabled.
2. Minor bug fixes.

Compatibility and Installation

1. The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.
2. VisualStation 2.3.10-3174 is only compatible with Surveillance Station 8.2.9-7301 and above.

Fixed Issues

1. Fixed the issue where Live View might not display camera feeds properly when the function to automatically adjust the stream profile according to the display size is enabled on the corresponding camera.
2. Fixed the issue where certain Reolink cameras might stop recording after the system updates to Surveillance Station 8.2.9-7296.
3. Minor bug fixes.

Compatibility and Installation

1. The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.
2. VisualStation 2.3.10-3171 is only compatible with Surveillance Station 8.2.9-7296 and above.
   *Note: Surveillance Station 8.2.9-7296 must be installed on Synology products running DSM 7.0 or above.
3. Starting from VisualStation 2.3.10-3171, the User application will no longer support administrators to set the display languages for other users.

What's New

1. Added support for the compatibility between DSM 6.2.4/DSM 7.0 or above in Surveillance Station CMS (the same Surveillance Station version is still required). *Note: Surveillance Station 8.2.9 for DSM 6.2.4 will be released within the next few weeks.
2. Added support for motion detection as an action in Action Rule, allowing third-party devices to trigger motion detection on cameras.
3. Added support for showing pop-up windows on specified VisualStations via Action Rule.
4. Increased the number of e-mail notification recipients to 10.
5. Enhanced the user experience of selecting multiple cameras when configuring Action Rule.
6. Increased the limit of camera names to 64 characters.

Compatibility and Installation

1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.
2. VisualStation 2.3.12-2181 is only compatible with Surveillance Station 8.2.11-6478 and above.
3. Updated to be compatible with Surveillance Station 8.2.11-6478.

Bug Fixed

1. Minor bug fixes.

Compatibility and Installation

1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.
2. VisualStation 2.3.11-2171 is only compatible with Surveillance Station 8.2.10-6468 and above.

Fixed Issues

1. Fixed an issue where live video might freeze if Live View Buffering is enabled.
2. Minor bug fixes.

Compatibility and Installation

1. The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.
2. VisualStation 2.3.10-2160 is only compatible with Surveillance Station 8.2.9-6459 and above.

3. Starting from VisualStation 2.3.10-2160, the User application will no longer support administrators to set the display languages for other users.

4. Added support for the compatibility between DSM 6.2.4/DSM 7.0 or above in Surveillance Station CMS (the same Surveillance Station version is still required).

5. Added support for motion detection as an action in Action Rule, allowing third-party devices to trigger motion detection on cameras.
6. Upgraded the maximum limit of People and Vehicle Detection, People Counting, and Intrusion Detection tasks to 12 (supported on DVA3221 only). Learn more
7. Added support for Face Recognition and Deep Video Analytics in Surveillance Station CMS. Users can now set up tasks and monitor detection results of all recording servers from the CMS host server (supported on DVA series models only).
8. Added support for exporting Face Recognition reports (supported on DVA series models only).
9. Extended the minimum duration setting for People and Vehicle Detection to 180 seconds (supported on DVA series models only).
10. Added support for enabling/disabling Deep Video Analytics and Face Recognition tasks as an action in Action Rule (supported on DVA series models only).
11. Added support for showing pop-up windows on specified VisualStations via Action Rule.
12. Increased the number of e-mail notification recipients to 10.
13. Enhanced the user experience of selecting multiple cameras when configuring Action Rule.
14. Increased the limit of camera names to 64 characters.

Fixed Issues

1. Fixed the issue where the system might quit unexpectedly when editing Action Rules in Home Mode.
2. Fixed the issue where Live View might wrongly show that cameras are disconnected when they take a longer time to respond.
3. Fixed the issue where AXIS T8311 running certain firmware versions might not be able to switch between joystick mode and mouse mode.
4. Minor bug fixes.

Important Note

• The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.
• VisualStation 2.3.9 is only compatible with Surveillance Station 8.2.8 and above.
• Upgraded No-Idle Zone in Deep Video Analytics to People and Vehicle Detection.
• Starting Surveillance Station 8.2.8, if a snapshot in a notification exceeds 1080p resolution (1920x1080), it will be compressed to 1280 pixels in width without changing the aspect ratio.

New Features

• Added support for the new application Face Recognition on DVA series models. The application leverages deep learning algorithms to deliver real-time face identification, keeps a record of all detected faces, and supports searching for recognition results with face photos.
• Added support for People and Vehicle Detection tasks in Deep Video Analytics on DVA series models. Users can now choose to detect people or vehicles only to avoid false alarms caused by other moving objects or background events.
• Added support for showing the occupancy number in Deep Video Analytics People Counting reports on DVA series models.
• Added support for remotely controlling the LED flashlights of devices running Synology LiveCam from Surveillance Station. (Synology LiveCam 1.1.0 or above is required.)
• Added support for granting non-admin users the privilege to pair Synology LiveCam with Surveillance Station. (Synology LiveCam 1.1.0 or above is required.)

Fixed Issues

• Fixed the issue where Timeline might not be able to play recordings.
• Fixed the issue where the Smart Time Lapse storage cannot be edited.
• Fixed the issue where the system might quit unexpectedly when playing streams of certain cameras if GPU acceleration is enabled.
• Minor bug fixes.

Important Note

• The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.
• VisualStation 2.3.8 is only compatible with Surveillance Station 8.2.7 and above.

New Features

• Added support for marking recordings with bookmarks and labels.
• Added support for reverse playback of recordings.
• Added support for event logs that record triggered events of cameras, I/O modules, and Deep Video Analytics (DVA) tasks.
• Added support for sending notifications when an Action Rule is triggered.
• Added support for speeding up forward/reverse video playback to 100x.
• Added support for extending the pre/post-recording times to 300 seconds (only supported on Synology NAS/NVR models with a memory capacity of 4 GB and above).
• Added support for recording merge-and-download.
• Added support for the Triggered Event layout in Live View that can be switched to automatically when an event is triggered.
• Added support for DVA Merged Counting tools.
• Added support for the DVA Parameter Adjuster to fine-tune settings using existing recordings or detected results.
• Added support for specifying detection targets (people or transportation) for DVA Intrusion Detection tasks.
• Added support for showing real-time camera information when viewing camera feeds, including Codec, FPS, Bitrate, and Resolution.
• Enhanced the process of adding and migrating licenses.
• Enhanced the user experience of editing and triggering DVA tasks.
• Optimized the display when multiple pop-up windows appear in Live View.
• Enhanced the user experience of selecting multiple cameras when configuring an Action Rule.

Fixed Issues

• Fixed the issue where certain settings of DVA No-Idle Zone tasks might not be applied properly.
• Fixed the issue where recordings might not play properly.
• Fixed the issue where Live View might not function properly when the Sequential Rotation layout is in use.
• Fixed the issue where Action Rule might not play audio patterns on time.
• Fixed the issue where recordings might not be deleted properly.
• Minor bug fixes.

Important Note

• The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.
• VisualStation 2.3.7-1817 is only compatible with Surveillance Station 8.2.6 and above.

New Features

• Added support for Deep Video Analytics with People Counting, Deep Motion Detection, Intrusion Detection, and No-Idle Zone task with high accuracy and rapid responses, based on deep learning algorithms (only supported on DVA3219 model).
• Added support for PIR motion sensor in Surveillance Station Motion Detection for better accuracy.
• Added support for indoor camera exposure control.
• Added support for license migration via Synology Account.
• Added support for exporting logs in Excel format.
• Added support for extending the beep time in LiveView Alert.
• Added support for triggering and receiving IFTTT events in Action Rule.
• Increased the time compression ratio limit of Timelapse to shorten the compression time.
• Enhanced the security performance of VS960HD.
• Enhanced the compatibility of ONVIF and Generic camera setup.

Fixed Issues

• Minor bug fixes.

Compatibility and Installation

1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.
2. VisualStation 2.3.6-1720 is only compatible with Surveillance Station 8.2.4.

New Features

1. Optimized the seek function in Timeline.

Fixed Issues

1. Fixed a security vulnerability regarding Samba (Synology-SA-19:15).
2. Minor bug fixes.

Compatibility and Installation

1. VisualStation 2.3.5-1701 is only compatible with Surveillance Station 8.2.3 and above.

Fixed Issues

1. Fixed an issue where the timeline seek function might not work properly after multiple operations in the Timeline and Recording player.
2. Fixed an issue where digital zoom might not function properly when Video scaling is set at High performance.
3. Fixed an issue where the snapshot list might not be updated automatically.

Compatibility and Installation

1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.
2. VisualStation 2.3.4-1700 is only compatible with Surveillance Station 8.2.3 and above.

Fixed Issues

1. Fixed a security vulnerability (Synology-SA-19:02).
2. Fixed an issue where IP addresses might be altered if VisualStation firmware is updated remotely.
3. Fixed an issue where the playback of H.265+ format videos on certain cameras might freeze.
4. Minor bug fixes.

Compatibility and Installation

1. VisualStation 2.3.3-1646 is only compatible with Surveillance Station 8.2 and above.

Fixed Issues

1. Fixed a security vulnerability regarding Netatalk (Synology-SA-18:62).

Compatibility and Installation

1. VisualStation 2.3.2-1645 is only compatible with Surveillance Station 8.2 and above.

Fixed Issues

1. Fixed a security vulnerability (Synology-SA-18:59)

Compatibility and Installation

1. VisualStation 2.3.1-1644 is only compatible with Surveillance Station 8.2 and above.

Fixed Issues

1. Fixed an issue where the CPU usage of NAS devices might increase under certain conditions.
2. Fixed an issue where the playback time of Timeline might be inconsistent when the filter is set at Show Events Only.
3. Fix an issue where recordings might not be played correctly on Timeline when there are more than 48 channels in a customized layout.
4. Minor bug fixes.

Compatibility and Installation

1. VisualStation 2.3.0-1641 is only compatible with Surveillance Station 8.2 and above.

What's New

1. Added support for remote firmware upgrade, allowing you to upgrade VisualStation firmware remotely on Surveillance Station.

2. Added support for remote Live View layout switching, allowing you to change the displaying layout remotely on Surveillance Station.

3. Added an icon to indicate the main and secondary display in the dual monitor output mode.

4. Optimized the Live View Alerts Management page that provides different event types for easy management.

5. Optimized the smoothness of UI operation and video playback.

Fixed Issues

1. Fixed a security vulnerability regarding OpenSSH (CVE-2018-15473).

2. Fixed a security vulnerability (Synology-SA-18:44).

Compatibility and Installation

1. VisualStation 2.2.5-1519 is only compatible with Surveillance Station 8.1.2 to 8.1.6.

Fixed Issues

1. Fix an issue where certain features might not work properly after the system is booted up for a while.
2. Fixed an issue where live view might not be displayed properly when logging in from a custom domain.
3. Fixed an issue where login errors might occur when passwords contain certain symbols.
4. Fixed an issue where authentication might still be required after the device is already trusted through OTP authentication.
5. Fixed an issue where the status of widgets might not be saved if Home Mode is not enabled.

Compatibility and Installation

1. VisualStation 2.2.4-1517 is only compatible with Surveillance Station 8.1.2 and above.

Fixed Issues

1. Updated Synology's terms and conditions for EU data privacy compliance.
2. Fixed a security vulnerability regarding Wget (CVE-2018-0494).

Compatibility and Installation

1. VisualStation 2.2.3-1505 is only compatible with Surveillance Station 8.1.2 and above.

Fixed Issues

1. Fixed an issue where camera live feeds may not be played under complicated network environment.
2. Fixed an issue where the optimization settings of the camera may not be applied properly.
3. Fixed an issue where an incorrect time zone may be displayed when logged in with non-admin accounts.
4. Enhanced the user interface of the Transactions application.
5. Fixed an issue where the system may not be stable if multiple pop-up windows are opened on the Live View Alert system.
6. Fixed a security vulnerability regarding NTP (Synology-SA-18:13).

Compatibility and Installation

1. VisualStation 2.2.2-1488 is only compatible with Surveillance Station 8.1.2 and above.

What's New

1. Added support to set up specific accounts to automatically log in to Local Display.
2. Added support for the Download List window.

Fixed Issues

1. Fixed an issue where Timeline may not work properly under certain operations.
2. Enhanced the update mechanism of Live View layout.

Compatibility and Installation

1. VisualStation 2.2.1-1404 is only compatible with Surveillance Station 8.1.0 and above.

Fixed Issues

1. Fixed an issue where the "Restore previous session windows upon login" function may not work properly after upgrading firmware.

2. Enhanced the live view alert mechanism of Transactions.

Compatibility and Installation

1. VisualStation 2.2.0-1403 is only compatible with Surveillance Station 8.1.0 and above.

What's New

1. Added support for proxy server to enhance network connectivity.

2. Added support for auto logout after an idle period to improve security.

3. Added support for desktop shortcut for more user convenience.

4. Added support for the search function on taskbar.

5. Added support for temporarily enlarging the size of the cursor by shaking the mouse to locate the cursor.

6. Added support for remembering login passwords for more convenience when logging in to Surveillance Station.

7. Enhanced user operation when deploying large scale CMS systems.

8. Enhanced system responsiveness and the immediacy of automatic page updates.

Compatibility and Installation

1. VisualStation 2.1.5-1237 is only compatible with Surveillance Station versions from 8.0.5 to 8.0.7.

Change logs

1. N/A. (This is the initial release of VS960HD)