Release Notes for Surveillance Station

(2025-09-02)

Important Note

1. For the following models, Surveillance Station 9.2.4 will be the last supported version: NVR216, NVR1218.
2. To enhance system stability, the rotation rule based on number limits is now enforced for the following applications. Records will be deleted upon update if the maximum limit has been reached.
   • Monitor Center app: If the alert history log limit was previously unlimited, it is now capped at 1,000,000 entries. If a limit was already set, it remains unchanged.
3. To improve CMS performance, desktop notifications no longer display rotation events that do not require immediate attention. Relevant details remain accessible in logs or event notifications.

What's New

1. Improved CMS performance: A single HD6500 CMS host server can now manage up to 3,000 recording servers and 30,000 cameras. See details
2. Added support for fisheye dewarping with custom parameters on cameras using Generic or User Define profiles.
3. Added support for sending motion detection results to third-party systems via Webhook in Action Rule. The five supported ingredients are: event time, server name, device name, event name, and event capture. See complete webhook ingredient list
4. Added support for license plate recognition in Ukraine and Kazakhstan.
5. Added support for restarting VisualStation VS600HD from Client Management.
6. Added support for 360° view for the Cupola360 C1PA08501 camera.
7. Added support for exporting license keys in .xlsx format.
8. Added an option to rotate recording history when free storage drops below 10%, helping avoid rotation failures due to low available space.
9. Updated API support. Refer to Surveillance Station WebAPI Document.
   • Added support for retrieving real-time people/vehicle counting results from Synology Camera.
   • Added support for exporting people/vehicle counting reports from Synology Camera.

Fixed Issues

1. Fixed an issue where alerts triggered by devices on Maps couldn't show a pop-up window, even when the "Pop-up windows" option was enabled in the alert settings.
2. Fixed an issue where only administrators could see pop-up windows triggered by Action Rule. These pop-ups now appear to all users with Live View access to the camera.
3. Fixed an issue where automatic updates could fail when adding a Synology Camera.
4. Fixed an issue in Surveillance Station 9.2.3 where exporting camera configurations might not work under certain conditions.
5. Fixed an issue where patrol actions triggered by Action Rule might not execute properly on certain camera models.
6. Fixed an issue where SIP speakers might emit static noise.
7. Fixed an issue where frequent camera reconnections could incorrectly trigger low storage warnings and interrupt recording.
8. Fixed an issue where users without permission to hide privacy masking could still export recordings with the masked areas disclosed.

(2025-03-06)

Important Note

1. To enhance system stability, the rotation rule based on number limits is now enforced for the following applications. Please note that records will be deleted upon update if the maximum limit has been reached.
   • Log, I/O Module, Action Rule app: If the rotation rule was not enabled, the log count is now limited to 10,000,000. If the setting was enabled, the number limit remains unchanged.
   • Recording app: If the rotation rule was not enabled, the number of bookmarks is now limited to 1,000,000. If the setting was enabled, the number limit remains unchanged.
   • Recording app: The number of event results is now limited to 10,000,000.
   • Transactions app: The historical record count is now limited to 1,000,000.
2. Sending notification emails via the Yahoo! email server is no longer supported. Please select a different supported email server.
3. To prevent excessive log generation from overwriting important records, the system will no longer log automatically generated bookmarks from the Action Rule app, Deep Video Analytics app, and Synology Camera.
4. Previously, only administrators could share recording file links. Starting from this version, users with permission to download recording files can also use this feature.

What's New

1. Added a 1,000,000 option for the log rotation number limit in Log, I/O Module, and Action Rule, in addition to the previously supported options of 10,000, 100,000, and 10,000,000.
2. For continuous events, the alert will not pop up again after the pop-up window is closed, preventing disruption of the monitoring view.
3. Added support for configuring duration per layout in sequential layout.
4. Added support for the Axis TU9001 control board, Axis TU9002 joystick, and Axis TU9003 keypad.
5. Enhanced the search method on the License Plate tab by defaulting to exact matches, while allowing users to include similar results for a broader range of recognition.
6. Added an option to customize the interval for ignoring repeated QR code events on Synology Camera with firmware version 1.2.1 or above.
7. Increased the camera name character limit from 64 to 192.

Fixed Issues

1. Fixed an issue where edge recordings from CC400W cameras might not be retrieved properly amid connection instability.
2. Fixed an issue where a memory leak might occur when certain camera models used the H.265 codec.
3. Fixed an issue where Diagnosis Tool was unexpectedly installed.
4. Fixed an issue where the Smart Search app might fail to load and could not open in certain cases.
5. Fixed an issue where SIP speakers might emit a buzzing noise while muted.
6. Fixed an issue where the crowd tag was not disabled after deactivating the counting task.
7. Fixed an issue where the 2.3.34.8 TakeSnapshot API did not work properly.
8. Fixed an issue where screenshots in search results were not displayed when using the Instant Search feature to find "motion" clips.
9. Fixed an issue where license plate report data in the Recording app was not synchronized with license plate event results.

(2024-11-26)

Important Note

1. From Surveillance Station 9.2.2, users can only see snapshots of the cameras they have playback privilege.
2. Added the face recognition results to the limit of 1,000,000. If user exceeds this limit, the system will delete the recognition results based on output time.

Compatibility & Installation

1. Surveillance Station 9.2.2-11575 is only supported on DSM 7.0 or above.
2. Surveillance Station 9.2.2 only supports Surveillance Station Client 2.1.3 or above.

What's New

1. Enhanced CMS compatibility. Starting from this version, a CMS host can manage recording servers running earlier builds of Surveillance Station, as long as the major and minor version numbers match. For example, CMS hosts in Surveillance Station 9.2.2 can manage recording servers running versions 9.2.0, 9.2.1, and 9.2.2.
2. Added support for adding incompatible recording servers to a CMS host. These servers will remain disconnected until they become compatible with the host but will allow a smoother initial deployment process by enabling the CMS host to centrally update the recording server versions in batches afterward.
3. Added support for customizing HTTP headers for webhook actions in Action Rule.
4. Added support for AXIS D3110 and its audio output feature.
5. Added support for detecting QR codes and identifying them as events for Synology Camera.
6. Added support for Counting tasks for people and vehicle in Synology Camera.
7. Added support for managing Synology Camera's crowd detection, people counting, and vehicle counting events in Recording.
8. Added support for the Report function to analyze data from counting tasks.
9. Optimized the display experience of detection settings in Monitor Center for Synology Camera.
10. Added support for limiting recognition to the numeric area in the lower section of Japanese license plates in People and Vehicle Detection tasks to improve accuracy (DVA models only).
11. Enhanced compatibility of exported camera profiles across different Surveillance Station versions.
12. Updated API support. Check Synology Surveillance API Document Site for details.
    • Added support for preset positions on third-party cameras.
    • Added support for triggering audio output on third-party cameras.
    • Added support for specifying a camera ID to download the camera's snapshots.
    • Added support for retrieving recognition results in People and Vehicle detection and People and Vehicle counting.

Fixed Issues

1. Fixed an issue where daylight saving time calculations in the Southern Hemisphere caused search filters to retrieve video recordings with incorrect timestamps.
2. Fixed an issue where users could not create new layouts in Monitor Center if a camera group layout contained an intercom.
3. Fixed an issue in Alert Layout where it might not automatically switch back to the original layout after the alarm ended.
4. Fixed an issue where an archiving task might get stuck at 0%.
5. Fixed an issue where an error log might mistakenly appear when starting Surveillance Station Client with the watermark setting enabled.
6. Fixed an issue where recording downloads from cameras might get stuck due to connectivity issues.
7. Fixed security vulnerabilities (Synology-SA-24:25).

(2024-09-26)

Important Note

1. With this update, the processing of media files using H.265 codecs will be transitioned from the server to end devices. This change is intended to reduce unnecessary resource usage and enhance system efficiency. Surveillance Station will continue to support H.265 cameras with only minor changes, ensuring nearly the same user experience, while H.264 cameras and H.265 cameras on DVA models will remain unaffected. Learn more.
   • Motion detection using Surveillance Station's algorithms will no longer be supported. The settings will automatically switch to using the camera's built-in algorithm if available, or be disabled.
   • Continuing to take snapshots after events for email notifications will no longer be supported.
   • The mechanisms for generating event snapshots and thumbnails for the camera list, detection results, timeline preview, and more have been adjusted. The image update frequency may be affected, which can be adjusted in the camera settings. Note that this may impact camera performance.
2. The Live View Analytics app will no longer be supported starting from this version.
3. C2 Surveillance has been renamed to C2 Backup for Surveillance.
4. Sending notifications to Slack or Microsoft Teams requires Surveillance Station 9.2.1 or above due to adjustments in the service providers' incoming webhook interface. Learn more

Compatibility & Installation

1. Surveillance Station 9.2.1 is only supported on DSM 7.2.2 or above.
2. Surveillance Video Extension (SVE) will be automatically installed with this update to enable viewing H.264 videos on Surveillance Station. Note that the SVE installation must be done over the Internet.

What's New

1. Added support for CMS hosts in Surveillance Station 9.2.1 to manage recording servers running versions 9.2.0 and 9.2.1.
2. Added support for using fisheye dewarping feature in web browser.
3. Added support for users in Canada, Switzerland, United Kingdom, United States, or EU countries to buy additional Surveillance Device License Pack from the link of Synology Store in the License app.
4. Added support for customizing HTTP headers for custom service providers' webhooks in Notification.
5. Added support for Synology Surveillance API GPTs. Learn more.
6. Updated API support. Check Synology Surveillance API Document Site for details.
   • Added support for retrieving more camera capability information, including digital input/output, audio output, and PTZ control.
   • Added support for the control of camera digital output.
   • Added support for camera's PTZ control.

Fixed Issues

1. Fixed an issue where dual recording files were incorrectly used to generate Smart Time Lapse videos.
2. Fixed an issue where the history results for door-related actions in Action Rule might be incorrect.
3. Fixed an issue where archive tasks might not complete due to overly long camera names or an excessive number of cameras.
4. Fixed an issue where edge recordings might not be fully retrieved.
5. Fixed an issue where the Preview Event and Next Event buttons in Monitor Center might not work if executed multiple times within a short period.
6. Fixed an issue where camera might not be added successfully due to a system database error.
7. Fixed an issue where the Surveillance Station web client might become inaccessible after updating to Surveillance Station 9.2.0 if version 6.3.0 or below had been installed previously.
8. Fixed an issue where recording thumbnails from certain ONVIF H.264 cameras might not display.
9. Fixed an issue where the timeline in Monitor Center might stop labeling events and updating thumbnails.
10. Fixed an issue where an action in Action Rule might be executed twice if both a triggered rule and a scheduled rule with the same actions were set up.
11. Fixed an issue where licenses might appear insufficient when adding licenses in CMS after if Synology Camera was added.
12. Fixed an issue where Monitor Center in Archive Vault did not retain the fixed aspect ratio setting.
13. Fixed an issue where recordings might not load properly if the system was updated from Surveillance Station 8.2.7 or below.
14. Fixed an issue where videos might not play in Monitor Center if more than 200 channels were closed simultaneously when multiple sequential layouts were played and rotated.
15. Fixed an issue where sending webhooks to WeChat did not work.
16. Fixed an issue where GPU acceleration cannot function when Surveillance Station Client is used with Surveillance Station 9.2.1-11374.

(2024-08-26)

This version has been replaced by Surveillance Station 9.2.1-11380 to fix an issue where GPU acceleration cannot function when Surveillance Station Client is used with this version.

(2024-03-28)

Important Notes

1. For the following models, Surveillance Station 9.2.0 will be the last upgradable version. *DS111, DS211j, DS211, DS211+, DS411slim, DS411j, DS411, RS411, DS112j, DS112, DS112+, DS212j, DS212, DS212+, RS212, RS812, DS213air, DS213, DS213+, DS413j, DS413.
2. The restriction on the minimum interval for adding bookmarks in Action Rule has been removed for Face Recognition, Deep Video Analytics, and AI detection tasks by Synology Camera, including "People and vehicle detected," "Intrusion detected," and "Crowd detected." Note that the accumulation of bookmarks could accelerate compared to previous rates.

What's New

1. Added support for Axis network door controllers for models A1610 and A1610-B (one license per door).
2. Added a new tab "Doors" under Axis Door Controller, allowing users to manage individual doors.
3. Added support for CMS in Axis Door Controller. Users can now manage access controllers, cardholders, access rules, and montior logs of all recording servers from the host server.
4. Added support for adding IP Speakers via the SIP protocol to conduct voice communication.
5. Added support for a new default privilege profile named "Administrator" that grants users access to all objects and the ability to manage Surveillance Station settings. Certain actions that involve modifying DSM settings are restricted and require the user to be added to the DSM administrators group.See all limitations
6. Added support for displaying users in the DSM administrator group within the Surveillance Station Users list, allowing administrators to change the privilege profiles of these users to Manager or Spectator.
7. Enhanced privilege settings to manage the ability to view logs and enable Smart Search privileges. Users without these privileges will not see the corresponding applications.
8. Added support for adding privacy masks to notification snapshots and recording thumbnails to protect sensitive areas.
9. Added support for using the task results of Face Recognition, License Plate Recognition, DVA tasks, and the Synology Camera's Analytics to create bookmarks in Action Rule. The available ingredients include face database profile, license plate, and captured image. Check the complete ingredient list
10. Added support for password-based authentication when exporting camera configurations.
11. Added support for Auto (UDP/TCP first) under Transport Protocol to reduce the possibility of frame drops.
12. Offering a streamlined interface by hiding the Map and Snapshot application from the main menu and desktop for users without view privileges.
13. Added support for two joystick models, SPC-2000 and IPDESKTOPUSB.
14. Added support for setting a minimum interval of two seconds in Action Rule so that users can respond to more frequent triggering needs.
15. Updated API support. Check Synology Surveillance API Document Site for details.
    • Added support for updating the longitude, latitude, direction facing, and field of view information of cameras, enabling real-time display of the positions on web maps for mobile devices such as drones and wearable cameras.
16. Added support for wireless Synology Camera CC400W.

Fixed Issues

1. Fixed an issue where some layouts might not display in sequential layouts.
2. Fixed an issue where the camera status might become "Unknown" in the Monitor Center layout if the recording servers have Link Aggregation configured.
3. Fixed an issue where recording files might be deleted after running recording re-index when the system database was corrupted.
4. Fixed the issue where the intensity of the IR LED on Synology Camera may be set to the wrong value when modifying image settings via DS cam.
5. Fixed an issue where the timeline might not display or operate properly in Monitor Center and the camera live view player when the PC had just resumed from Sleep mode.
6. Fixed an issue where enabling dual recording to Synology C2 cloud storage for cameras using the AAC audio format might cause Surveillance Station to run slowly.
7. Fixed an issue where IP address cannot be modified after Synology Camera is added via domain names.
8. Fixed an issue where migrated cameras became unavailable on the layout after executing CMS migration.
9. Fixed an issue where the failover server might freeze when multiple recording servers disconnected at the same time.
10. Fixed multiple security vulnerabilities. (Synology-SA-24:04)

(2024-01-11)

Fixed Issues

1. Fixed an issue where notifications did not include snapshots when Home Mode notification was enabled.
2. Fixed an issue where cameras with MJPEG video format could't download edge recordings normally.
3. Fixed an issue where the CMS host server would not receive notifications when the recording server triggered the "Recording FPS too low" notification.
4. Fixed an issue where recordings couldn't rotate normally due to the recording rule being stopped.
5. Fixed an issue where Surveillance Station Client and DVA series models could not play videos normally when the camera was in H.265 video format.

(2023-12-07)

What's New

1. Added support for IEEE 802.1x wired authentication with EAP-PEAP, EAP-TLS, and EAP-TTLS protocols to enhance security for Synology Camera.
2. Added support for Real-Time Messaging Protocol (RTMP) in Surveillance Station, enabling video streaming scenarios such as drones or body cameras that do not have static IPs.
3. Added support for smart bitrate control for Synology Camera, reducing bitrate while preserving essential details.
4. Added support for automatic firmware updates for Synology Cameras after Surveillance Station is updated.
5. Added support for sending Surveillance Station notifications to Discord, Microsoft Teams, LINE, and Slack via webhook.
6. Added support for including additional event information in notifications. You can go to Notification > Rules > Edit and click Add Ingredient for the list of available ingredients.
7. Added support for sending notifications when a camera's FPS is too low or the recording is abnormal.
8. Added support for Integration Tool, allowing users to submit requests for the inclusion of unsupported cameras in the IP Camera Support List by exporting their camera configurations.
9. Added support for Auto Tracking for Synology Camera to follow individuals' movements.
10. Added support for receiving external event data from third-party systems via Webhook through the POST and PUT methods.
11. Added support for recognizing license plates in 20 regions in License Plate Recognition for DVA models. Check supported regions.
12. Added support for reporting AI detection inaccuracy, allowing Synology to continuously enhance detection accuracy.
13. Updated API support. Check Synology Surveillance API Document Site for details.
    • Added support for specifying a time interval for taking snapshots.
    • Added support for editing License Plate Database and retrieving recognition results.

Fixed Issues

1. Fixed an issue where adding a bookmark for H.265 recording may fail.
2. Fixed an issue where the RTSP stream path shared from Surveillance Station might not be played.
3. Fixed an issue where the import of Ubiquiti G3 Flex by a camera list (.xlsx) might fail.
4. Fixed an issue where an uninterruptible action rule might fail to initiate a webhook for consecutive triggers.
5. Removed the character limitations for storage capacity settings to support higher-level storage needs.
6. Fixed an issue where no alert sound and popup window appeared after triggering the Live View Analytics event.
7. Added a limitation to only allow optical zoom when entering PTZ control mode to prevent accidental zooming.
8. Fixed an issue where a manually recreated surveillance shared folder may not be accessible by Surveillance Station despite having proper read/write permissions after deleting the original folder.
9. Fixed an issue where the user list in Privilege Profile might not display properly when filter conditions were mistakenly applied.
10. Enhanced user experience by remembering the playback speed setting in Recording Player.
11. Fixed an issue where user names containing spaces could not be disabled.

(2023-10-25)

Important Note

1. Removed the limitation on the number of IP cams. Check the suggested maximum number of IP cams in your product specification first for better performance.

What's New

1. Added support for adjusting IR LED intensity of Synology Camera.

Fixed Issues

1. Fixed an issue where the audio privilege settings might not work properly under CMS relay service over the Internet.

(2023-07-03)

What's New

1. Added support for receiving external event data from third-party systems via Webhooks.
2. Added support for displaying License Plate Recognition results from DVA models with accurate screenshots in the Recording app.
3. Added support for recognizing Vietnam license plates in License Plate Recognition for DVA models.
4. Added support for playing H.265 format video when using hardware acceleration in Google Chrome. You need to enable this settings at Surveillance Station > Personal Settings > Advanced.
5. Added support for displaying bookmarks information triggered by action rules in the On-Screen Display (OSD) within Monitor Center, allowing users to access additional information about Webhook events.
6. Added support for Action Rule to trigger Webhook alerts and display them in Monitor Center.
7. Added support for showing bookmark thumbnails in the Recording app's Bookmarks tab.
8. Added support for sorting layouts in Monitor Center by either creation time or alphabetical order.
9. Added support for Synology Camera Operation Log function, empowering users with more control over the operation history.
10. Updated the timestamp format of the %EVENT_TIME% parameter for Webhook in Action Rule to YYYY-MM-DDTHH:MM:SS.

Fixed Issues

1. Fixed an issue where the Previous event button in Monitor Center might not work.
2. Fixed an issue where CMS host might not display the cameras added to recording servers.
3. Fixed an issue where the Enable camera and the Disable camera options do not appear when the All Cameras option is selected in the Action for Action Rule.
4. Fixed an issue where the Forever option cannot be selected for Synology LiveCam when configuring the Share stream path.
5. Fixed an issue where CMS application of the host server might not open if the IP address of the recording server or the failover server are changed.
6. Fixed an issue where recordings might not be played back using timeline in Monitor Center.
7. Fixed an issue where the camera liveview might freeze.
8. Fixed an issue where snapshots generated by Action Rule might have image quality problems.
9. Fixed an issue where multiple recording servers might not reconnect properly after disconnecting simultaneously.
10. Fixed an issue where descriptions of user groups added via LDAP might not be displayed correctly.
11. Fixed an issue where DS cam might crash if Notification Combination is enabled.

(2023-06-27)

This version has been replaced by Surveillance Station 9.1.2-10854 to fix an issue where DS cam might crash if Notification Combination is enabled.

(2023-05-02)

Important Note

1. Removed the "All objects" option in DVA Intrusion Detection.

What's New

1. Added support for sending Face Recognition, License Plate Recognition, and other DVA task results to third-party systems via Webhook in Action Rule. The 14 available ingredients include face database profile, license plate, and captured image. (Complete ingredient list)
2. Added support for showing a response from the third-party server after sending a webhook test in Action Rule.
3. Enhanced user experience by automatically opening camera live view and recording players in full-screen mode.
4. Added support for showing the Edge Recording retrieval status of Synology Camera in real-time.
5. Added support for exporting cameras to a camera list (.xlsx).

Fixed Issues

1. Fixed an issue where Monitor Center might not display properly due to certain ONVIF cameras.
2. Fixed an issue where the push notification setting page might not display the list of paired DS cam devices.
3. Fixed an issue where Surveillance Station might not be able to retrieve Edge Recording files from Synology Camera under specific conditions.
4. Fixed an issue where shortcuts are triggered accidentally when typing keywords in Monitor Center's Bookmark Panel filter.
5. Fixed an issue where Advanced Events might not trigger recording properly.

(2023-03-14)

What's New

1. Added support for Synology Camera models BC500 and TC500. Configurations including image adjustment, People and Vehicle detection, and firmware updates are available in the IP Camera application.
2. Added support for the Synology Camera Instant Search function in Monitor Center, allowing users to find previously recorded clips of people, vehicles, or motion in specific areas.
3. Added support for attaching a GIF file of Synology Camera-detected events to email notifications on Synology x86-64 server models.
4. Added support for the Bookmark Panel on the right side of Monitor Center, allowing users to view and manage bookmarks.
5. Added support for displaying people and vehicle detection results from Synology Camera and DVA models with accurate screenshots in the Recording application.
6. Added support for displaying Motion Detection results in the Recording application on Synology server models with 2GB RAM and above.
7. Added support for the following types of Hanwha analytics: Object Detection, IVA (Intelligent Video Analytics), Shock Detection, Defocus Detection, and Fog Detection.
8. Added support for displaying camera names when sending event logs to syslog.
9. Added support for an option to determine whether to continue using Dual Recording when the system enters Home Mode.

Fixed Issues

1. Fixed an issue where Action Rule might not execute properly when multiple rules are triggered at the same time in a very short period of time.
2. Fixed an issue where H.265 streams of certain cameras might lag.
3. Fixed an issue where push notifications might not be sent normally.
4. Fixed an issue where Monitor Center might not display Axis Motion Guard events correctly.
5. Fixed an issue where camera configuration files exported from Surveillance Station 9.0.2 or before cannot be imported.
6. Fixed an issue where the Alert Panel might wrongly show recordings that have been rotated.
7. Fixed an issue where the Monitor Center window might not resize correctly after exiting full-screen mode.
8. Fixed an issue where Surveillance Station might not be able to be installed or uninstalled.
9. Fixed an issue where recordings might be deleted when the camera recording storage is changed.
10. Minor bug fixes.

(2022-11-10)

Important Note

1. AXIS has updated their Barcode Reader into a new package that requires a paid license. Starting from this version, Surveillance Station will no longer support AXIS Barcode Reader as a transaction source in the Transactions application. (Learn more)

What's New

1. Added support for a new C2 Surveillance plan that allows continuous recording in 5MP/1080p resolution and recording storage for 180 days.
2. Added support for C2 Surveillance client-side encryption that encrypts recordings from the Surveillance Station server.
3. Added support for wall-mount camera mode in DVA People Counting tasks.
4. Added support for recognizing Japanese license plates in DVA People and Vehicle Detection tasks.
5. Added support for applying multiple privilege profiles to individual users.
6. Added support for showing only events on the Monitor Center timeline.
7. Added support for creating desktop shortcuts for Monitor Center layouts.

Fixed Issues

1. Fixed an issue where multi-channel live video in Monitor Center might lag.
2. Fixed an issue where Synology LiveCam might disconnect and reconnect continually.
3. Fixed an issue where Joysticks might not be able to dynamically adjust cameras' PTZ movement speed.
4. Fixed an issue where DS cam might receive incorrect notifications.
5. Fixed an issue where the notifications of certain cameras might not attach snapshots correctly.
6. Added support for C2 Surveillance to pair cameras using variable bit rate.
7. Fixed an issue where the camera list might be cleared after restarting Surveillance Station.
8. Fixed an issue where Surveillance Station Client and DS cam might not be able to play H.265 streams.
9. Minor bug fixes.

(2022-10-19)

This version is replaced by version 9.0.2-10061 to fix stream related issues.

(2022-07-21)

Important Note

1. The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.
2. Surveillance Station 9.0.1-7673 must be installed on Synology products running DSM 7.0 or above.
3. Surveillance Station 9.0.1-7673 only supports Synology Surveillance Station Client 2.0.0 and above.
4. Surveillance Station 9.0.1-7673 only supports VS360HD 5.0.0 and above.
5. Surveillance Station 9.0.1-7673 only supports VS960HD 3.0.0 and above.

Fixed Issues

1. Fixed an issue where privilege profiles might not be applied to cameras added in batch.
2. Fixed an issue where enabling mobile notification encryption might reset the Do Not Disturb setting on DS cam.
3. Fixed an issue where updating Surveillance Station to version 9.0.0 or above might cause DS cam to be unable to mark events on the timeline.
4. Fixed an issue where cameras cannot use Live View Analytics when being set to automatically adjust the stream profile according to the display size.
5. Fixed an issue where Hyper Backup cannot back up the Surveillance Station package when the recording size is very large.
6. Fixed an issue where enabling C2 Surveillance might increase the CPU usage after upgrading to Surveillance Station 9.0.1-7672.
7. Minor bug fixes.

(2022-07-12)

This version has been replaced by Surveillance Station 9.0.1-7673 to fix an issue where enabling C2 Surveillance might increase the CPU usage.

(2022-05-18)

Compatibility and Installation

1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.
2. Surveillance Station 9.0.0-7660 must be installed on Synology products running DSM 7 or above.
3. Surveillance Station 9.0.0-7660 only supports Synology Surveillance Station Client 2.0.0 and above.
4. Surveillance Station 9.0.0-7660 only supports VS360HD 5.0.0 and above.
5. Surveillance Station 9.0.0-7660 only supports VS960HD 3.0.0 and above.
6. Live View and Timeline have merged into Monitor Center. The existing functions, layouts, and settings will be completely migrated to the new platform. (Learn more)
7. Certain management features will no longer be supported on VisualStation and Surveillance Station Local Display on NVR1218 and NVR216. (Learn more)
8. Surveillance Station 9.0 does not support VS360HD models running firmware version 3.0.5 or below and VS240HD models.
9. The Log application has removed the rule setting page and will log all actions from now on.
10. Starting from DSM 7.1-42661, Surveillance Station 9.0 requires the DSM package Advanced Media Extensions (AME) to play AAC audio and HEVC (H.265) video format. In this update:
    • Cameras using AAC will be switched to other available audio formats automatically.
    • Cameras using HEVC (H.265) can no longer play videos, display thumbnails, or use Motion Detection via Surveillance Station without further settings.
    • Go to AME for setup if you wish to continue using AAC and HEVC (H.265).

What's New

Monitor Center

1. Added support for the new application, Monitor Center. You can monitor live camera feeds, seamlessly browse through the interactive timeline, and customize your layout.
2. Added support for the global stream profile button. You can control the stream profile for all cameras in the same layout simultaneously.
3. Added support for the I/O Widget channel. You can check the statuses and trigger events for I/O devices.
4. Added support for triggering customized Action Rule events in Monitor Center.

C2 Surveillance

1. Added support for the new application, C2 Surveillance. You can upload recordings to Synology C2 cloud and view important footage from the C2 Surveillance web portal. Recordings are protected by end-to-end encryption. (Learn more)

Recordng

1. Upgraded the recording mechanism to let all services share the same recording files for optimized storage usage.
2. Added support for bookmark logs that allow direct management for bookmarked recordings.
3. Added support for the Add bookmark event in Action Rule.
4. Added support for Dual Recording. You can save a second set of recordings with different settings to the local storage or a remote shared folder.

Security

1. Enhance the security of shared folders. Surveillance Station now requires access permissions to connect to shared folders on Synology servers.
2. Added support for HTTPS secure connection between servers and compatible cameras.
3. Added support for SRTP video encryption between servers and compatible AXIS, Bosch, and Hanwha cameras.
4. Added support for Privacy Masking to cover sensitive areas in the camera view.
5. Added support for adding text watermarks to live camera feeds.
6. Added support for logging user account logouts.
7. Added support for activating user accounts by schedule.
8. Added support for recording encryption to prevent data leakage.
9. Added support for password protection to secure downloaded recordings.

Maps

1. Added support for the new Maps application. You can visualize the target environment, experience seamless monitoring, and automatically track security events across multiple locations.
2. Added support for grouping related maps together to quickly navigate multiple locations.
3. Added support for map services including OpenStreetMap, Google Maps, or a custom tile server to quickly identify multiple locations with abnormal statuses.

Device Management

1. Enhanced the camera adding process by supporting auto searching, IP range scanning, and multiple batch configuration methods (Quick setup, Complete setup, and Copy settings).
2. Added support for batch importing cameras by a list (.xlsx) of camera information and configurations.
3. Added support for adding cameras offline through ONVIF or Generic setup.
4. Renamed Batch Edit to Copy Settings, and added support for a preview of configurations and expected results before the settings are applied.
5. Added support for updating multiple servers online or manually through CMS host servers.
6. Added support for updating servers to the compatible version when adding CMS recording servers.
7. Added support for updating multiple VisualStation devices online or manually through connected servers.

Deep Video Analytics

1. Added support for License plate recognition. (Supported regions)
2. Added support for License plate recognition logs, notifications, Action Rule events, and recognition reports.
3. Added support for License plate recognition result searching that allows 2-character differences.
4. Added support for showing License plate recognition events in the Monitor Center Alert Panel.
5. Added support for an option to trigger events only when people and vehicles appear simultaneously.
6. Increased the target stay-time limit to 600 seconds.
7. Added support for bookmarking detected objects automatically in the Recording application.
8. Added support for Face Detection and People Detection tests to help adjust the camera position for optimal accuracy.
9. Added support for Vehicle Counting to track the number of passing vehicles within a given time.
10. Added support for logs, notifications, Action Rule events, and counting reports for Vehicle counting.
11. Added support for showing Vehicle Counting events in the Monitor Center Alert Panel.
12. Added support for downloading detection result logs.
13. Added support for DVA event (People and Vehicle Detection/Intrusion Detection) counting reports.

More Features

1. Added support for showing the triggered Advanced Event type in notifications sent by DS cam.
2. Added support for filtering thermal cameras in the IP Camera application.
3. Added support for manually entering the NTP server's IP address for cameras.
4. Enhanced the user experience for testing camera connections.
5. Added support for batch editing Archive Vault bandwidth control settings.

Known Limitations

1. Due to the update of the recording mechanism, certain settings of Live View Alert, Action Rule Recording, Manual Recording, Advanced Continuous Recording, and Transactions will be modified:

• The services will no longer save independent recordings.
• The recordings of the services will no longer be shown in File Station by category (still available for downloaded in Surveillance Station).
• The cameras will apply the highest archive setting and stream profile value available for the services.

1. Privacy Masking and watermarks are not supported on Android DS cam 3.5.1/iOS DS cam 5.4.1 and before.

(2022-03-29)

Compatibility and Installation

1. The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.
2. Surveillance Station 8.2.11-7328 must be installed on Synology products running DSM 7.0 or above.
3. Surveillance Station 8.2.11-7328 only supports Synology Surveillance Station Client 1.2.12-2192 and above.
4. Surveillance Station 8.2.11-7328 only supports VS360HD 4.3.10-6191 and above.
5. Surveillance Station 8.2.11-7328 only supports VS960HD 2.3.12-3191 and above.
6. Surveillance Station 8.2.11-7328 requires the DSM package Advanced Media Extensions to use the AAC audio and H.265 video format. If you do not go to the package for setup: (Only affects Synology devices running on DSM 7.1 or above.)
   • For cameras that currently use AAC and support other audio formats, another format will be applied. For cameras that do not support other formats, their audio will be unavailable.
   • For cameras that currently use H.265, video playing and Motion Detection by Surveillance Station will be unavailable.

Bug Fixed

1. Fixed an issue where mobile recordings cannot be uploaded to Surveillance Station if Synology LiveCam previously disconnected from the server.
2. Minor bug fixes.

(2022-03-29)

Compatibility and Installation

1. The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.
2. Surveillance Station 8.2.11-6478 must be installed on Synology products running DSM 6.2.4 or above.
3. Surveillance Station 8.2.11-6478 only supports Synology Surveillance Station Client 1.2.12-1172 and above.
4. Surveillance Station 8.2.11-6478 only supports VS360HD 4.3.10-5191 and above.
5. Surveillance Station 8.2.11-6478 only supports VS960HD 2.3.12-2181 and above.

Bug Fixed

1. Fixed an issue where mobile recordings cannot be uploaded to Surveillance Station if Synology LiveCam previously disconnected from the server.
2. Minor bug fixes.

(2021-10-26)

Compatibility and Installation

1. The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.
2. Surveillance Station 8.2.10-7310 must be installed on Synology products running DSM 7.0 or above.
3. Surveillance Station 8.2.10-7310 only supports Synology Surveillance Station Client 1.2.11-2181 and above.
4. Surveillance Station 8.2.10-7310 only supports VS360HD 4.3.9-6181 and above.
5. Surveillance Station 8.2.10-7310 only supports VS960HD 2.3.11-3181 and above.

What's New

1. Increased the limit of privilege profile names to 64 characters.

Fixed Issues

1. Fixed an issue where unsupported push service mails might still be sent under certain circumstances.
2. Fixed an issue where the recording player might prompt incorrect messages.
3. Fixed an issue where H.265+ recordings cannot be played from the beginning.
4. Fixed an issue where recordings on the recording server cannot be viewed on the CMS host server if video relay over the Internet is enabled.
5. Minor bug fixes.

(2021-10-26)

Compatibility and Installation

1. The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.
2. Surveillance Station 8.2.10-6468 must be installed on Synology products running DSM 6.2.4 or above.
3. Surveillance Station 8.2.10-6468 only supports Synology Surveillance Station Client 1.2.11-1161 and above.
4. Surveillance Station 8.2.10-6468 only supports VS360HD 4.3.9-5181 and above.
5. Surveillance Station 8.2.10-6468 only supports VS960HD 2.3.11-2171and above.

What's New

1. Increased the limit of privilege profile names to 64 characters.

Fixed Issues

1. Fixed an issue where the recording player might prompt incorrect messages.
2. Fixed an issue where H.265+ recordings cannot be played from the beginning.
3. Fixed an issue where recordings on the recording server cannot be viewed on the CMS host server if video relay over the Internet is enabled.
4. Minor bug fixes.

(2021-06-29)

Compatibility and Installation

1. The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.
2. Surveillance Station 8.2.9-7301 must be installed on Synology products running DSM 7.0 or above.
3. Surveillance Station 8.2.9-7301 only supports Synology Surveillance Station Client 1.2.10-2174 and above.
4. Surveillance Station 8.2.9-7301 only supports VS360HD 4.3.8-6174 and above.
5. Surveillance Station 8.2.9-7301 only supports VS960HD 2.3.10-3174 and above.

Fixed Issues

1. Fixed the issue where Live View might not display camera feeds properly when the function to automatically adjust the stream profile according to the display size is enabled on the corresponding camera.
2. Fixed the issue where certain Reolink cameras might stop recording after the system updates to Surveillance Station 8.2.9-7296.
3. Minor bug fixes.

(2021-06-23)

Compatibility and Installation

1. The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.
2. Surveillance Station 8.2.9-6459 must be installed on Synology products running DSM 6.2.4 or above.
3. Surveillance Station 8.2.9-6459only supports Synology Surveillance Station Client 1.2.10-1148 and above.
4. Surveillance Station 8.2.9-6459 only supports VS360HD 4.3.8-5170 and above.
5. Surveillance Station 8.2.9-6459 only supports VS960HD 2.3.10-2160 and above.
6. If Advanced Media Extensions is not installed, the system will automatically install the package after the update to ensure functionality.
7. Starting from Surveillance Station 8.2.9-6459, EDS14 will no longer be supported.
8. Starting from Surveillance Station 8.2.9-6459, the User application will no longer support administrators to set the display languages for other users.
9. After updating to Surveillance Station 8.2.9-6459, DVA series models will migrate existing Deep Motion Detection tasks into People and Vehicle Detection tasks while keeping the original settings.
10. Starting from Surveillance Station 8.2.9-6459, DVA series models will no longer support smart tags for animals and tampering in Intrusion Detection.

What's New

1. Added support for the compatibility between DSM 6.2.4/DSM 7.0 or above in Surveillance Station CMS (the same Surveillance Station version is still required).
2. Added support for the option to back up Surveillance Station configurations only in Hyper Backup.
3. Added support for motion detection as an action in Action Rule, allowing third-party devices to trigger motion detection on cameras.
4. Upgraded the maximum limit of People and Vehicle detection, People Counting, and Intrusion Detection tasks to 12 (supported on DVA3221 only). Learn more
5. Added support for Face Recognition and Deep Video Analytics in Surveillance Station CMS. Users can now set up tasks and monitor detection results of all DVA series models' recording servers from the CMS host server.
6. Added support for exporting Face Recognition reports (available on DVA models and the web-based interface).
7. Extended the minimum duration setting for People and Vehicle Detection to 180 seconds (supported on DVA series models only).
8. Added support for enabling/disabling Deep Video Analytics and Face Recognition tasks as an action in Action Rule (supported on DVA series models only).
9. Added support for showing pop-up windows on specified VisualStations via Action Rule.
10. Added support for temporally muting the beep sound in DSM Control Panel via Local Display of NVR models.
11. Increased the number of e-mail notification recipients to 10.
12. Enhanced the user experience of selecting multiple cameras when configuring Action Rule.
13. Reduced the connection time for browsing videos on recording servers via the CMS host server.
14. Increased the limit of camera names to 64 characters.

Fixed Issues

1. Fixed the issue where updating to Device Pack 5.8.2 might remove the settings of Hikvision Smart Event and DAHUA IVS in Surveillance Station.
2. Fixed the issue where scheduled notifications of digital input might not be sent correctly when AXIS cameras do not support ACAP.
3. Fixed the issue where administrators cannot untick options correctly when setting up layout privileges.
4. Fixed the issue where Timeline cannot play recordings normally when using the calendar to filter results in non-sync mode.
5. Fixed the issue where the IP Camera application might not display normally under specific conditions.
6. Fixed the issue where sending Action Rule notifications for cameras added via User Defined setup that are currently disabled might cause system abnormality.
7. Fixed the issue where PTZ functions cannot be disabled in the IP Camera application if the camera does not support preset points or PTZ speed adjustment.
8. Minor bug fixes.

(2021-06-01)

Compatibility and Installation

1. The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.
2. Surveillance Station 8.2.9-7296 must be installed on Synology products running DSM 7.0 or above.
3. Surveillance Station 8.2.9-7296 only supports Synology Surveillance Station Client 1.2.10-2171 and above.
4. Surveillance Station 8.2.9-7296 only supports VS360HD 4.3.8-6171 and above.
5. Surveillance Station 8.2.9-7296 only supports VS960HD 2.3.10-3171 and above.
6. Starting from Surveillance Station 8.2.9-7296, EDS14 will no longer be supported.
7. Starting from Surveillance Station 8.2.9-7296, the User application will no longer support administrators to set the display languages for other users.

What's New

1. Added support for the compatibility between DSM 6.2.4/DSM 7.0 or above in Surveillance Station CMS (the same Surveillance Station version is still required).
   *Note: Surveillance Station 8.2.9 for DSM 6.2.4 will be released within the next few weeks.
2. Added support for the option to back up Surveillance Station configurations only in Hyper Backup.
3. Added support for motion detection as an action in Action Rule, allowing third-party devices to trigger motion detection on cameras.
4. Added support for showing pop-up windows on specified VisualStations via Action Rule.
5. Added support for temporally muting the beep sound in DSM Control Panel via Local Display of NVR models.
6. Increased the number of e-mail notification recipients to 10.
7. Enhanced the user experience of selecting multiple cameras when configuring Action Rule.
8. Reduced the connection time for browsing videos on recording servers via the CMS host server.
9. Increased the limit of camera names to 64 characters.

(2020-09-01)

Important Note

• The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Fixed Issues

• Fixed the issue where the video and audio of recordings might be out of sync on Surveillance Station 8.2.8-6334.
• Fixed the issue where certain cameras added via ONVIF protocol might consume excessive memory.
• Minor bug fixes.

(2020-07-14)

Important Note

• To run Surveillance Station 8.2.8 on DVA3219, NVIDIA Runtime Library 1.0.1-0014 and DSM 6.2.3-25426 or above are required.
• The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.
• Surveillance Station 8.2.8 must be installed on Synology products running DSM 6.0-7321 or above.
• Surveillance Station 8.2.8 only supports Synology Surveillance Station Client 1.2.9 and above.
• Surveillance Station 8.2.8 only supports VS360HD 4.3.7 and above.
• Surveillance Station 8.2.8 only supports VS960HD 2.3.9 and above.
• Upgraded No-Idle Zone in Deep Video Analytics to People and Vehicle Detection.
• Starting Surveillance Station 8.2.8, if a snapshot in a notification exceeds 1080p resolution (1920x1080), it will be compressed to 1280 pixels in width without changing the aspect ratio.

New Features

• Added support for the new application Face Recognition on DVA series models. The application leverages deep learning algorithms to deliver real-time face identification, keeps a record of all detected faces, and supports searching for recognition results with face photos.
• Added support for People and Vehicle Detection tasks in Deep Video Analytics on DVA series models. Users can now choose to detect people or vehicles only to avoid false alarms caused by other moving objects or background events.
• Added support for showing the occupancy number in Deep Video Analytics People Counting reports on DVA series models.
• Added support for remotely controlling the LED flashlights of devices running Synology LiveCam from Surveillance Station. (Synology LiveCam 1.1.0 or above is required.)
• Added support for granting non-admin users the privilege to pair Synology LiveCam with Surveillance Station. (Synology LiveCam 1.1.0 or above is required.)
• Added support for adding text and image watermarks when downloading recordings. (Only supported on Synology Surveillance Station Client.)
• Added support for Dahua Intelligent Video System (IVS) to compatible cameras.
• Extended Hikvision Smart Event support. All cameras with Smart Event support, including those that were not added via Generic setup, can now enable the function on Surveillance Station.

Fixed Issues

• Fixed the issue where Archive Vault might not delete the corresponding information correctly when rotating recordings.
• Fixed the issue where, after force restarts, cameras might only be able to apply the time zone of client computers when the time display source is set to "Server".
• Fixed the issue where camera passwords might not be encrypted in configuration files.
• Fixed the issue where certain Canon cameras consume excessive memory when using MJPEG codec.
• Fixed the issue where action rules might not be able to send scheduled notifications correctly if their schedules overlap.
• Fixed the issue where an action rule might not be able to trigger different doors or IP speakers to execute the same action.
• Fixed the issue where cameras cannot be added when a recording folder with the same name already exists.
• Fixed the issue where push service might consume excessive memory when Surveillance Station is not connected to the Internet.
• Fixed the issue where a CMS failover server might not be able to perform failback if the recording server was updated during its downtime.
• Fixed the issue where a CMS host server might not be able to edit the settings of cameras connected to its recording servers.
• Fixed the issue where schedules of Access Control notifications might be reset to previous settings incorrectly.
• Minor bug fixes.

(2020-02-11)

Important Note

• The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.
• Surveillance Station 8.2.7 must be installed on Synology products running DSM 6.0-7321 and above.
• Surveillance Station 8.2.7 supports Surveillance Station Client 1.2.8 and above.
• Surveillance Station 8.2.7 supports VS360HD 4.3.6 and above.
• Surveillance Station 8.2.7 supports VS960HD 2.3.8 and above.

New Features

• Added support for marking recordings with bookmarks and labels.
• Added support for reverse playback of recordings.
• Added support for event logs that record triggered events of cameras, I/O modules, and Deep Video Analytics (DVA) tasks.
• Added support for sending notifications when an Action Rule is triggered.
• Added support for speeding up forward/reverse video playback to 100x.
• Added support for extending the pre/post-recording times to 300 seconds (only supported on Synology NAS/NVR models with a memory capacity of 4 GB and above).
• Added support for recording merge-and-download.
• Added support for the Triggered Event layout in Live View that can be switched to automatically when an event is triggered.
• Added support for DVA Merged Counting tools.
• Added support for the DVA Parameter Adjuster to fine-tune settings using existing recordings or detected results.
• Added support for specifying detection targets (people or transportation) for DVA Intrusion Detection tasks.
• Added support for pausing camera feeds when setting up minimum objects sizes in DVA tasks.
• Added support for showing real-time camera information when viewing camera feeds, including Codec, FPS, Bitrate, and Resolution.
• Added support for audio format 16-bit PCM-LE.
• Enhanced the process of adding and migrating licenses.
• Enhanced the user experience of editing and triggering DVA tasks.
• Optimized the display when multiple pop-up windows appear in Live View.
• Enhanced the user experience of selecting multiple cameras when configuring an Action Rule.

Fixed Issues

• Fixed the issue where User-Defined cameras might not play videos properly.
• Fixed the issue where snapshots attached to I/O module-triggered notifications might not display properly.
• Fixed the issue where log sending might not function properly after NAS/NVR restarts.
• Fixed the issue where Live View camera feeds of recording servers might not play properly on the host server.
• Fixed the issue where Archive Vault might not function properly after settings are modified.
• Fixed the issue where cameras that use encrypted volumes as their recording storage might not record properly after NAS/NVR restarts.
• Minor bug fixes.

(2020-01-14)

Important Note

• This version has been replaced by Surveillance Station 8.2.7-6222 to fix an issue regarding recurring notifications of image quality.

(2019-07-30)

Important Note

• The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.
• Surveillance Station 8.2.6 must be installed on Synology products running DSM 6.0-7321 and above.
• Surveillance Station 8.2.6 supports Surveillance Station Client 1.2.7 and above.
• Surveillance Station 8.2.6 supports VS360HD 4.3.5 and above.
• Surveillance Station 8.2.6 supports VS960HD 2.3.7 and above.

New Features

• Added support for Deep Video Analytics with People Counting, Deep Motion Detection, Intrusion Detection, and No-Idle Zone task with high accuracy and rapid responses, based on deep learning algorithms (only supported on DVA3219 model).
• Added support for PIR motion sensor in Surveillance Station Motion Detection for better accuracy.
• Added support for triggering and receiving IFTTT events in Action Rule.
• Added support for extending the beep time in LiveView Alert.
• Added support for exporting logs in Excel format.
• Added support for license migration via Synology Account.
• Increased the time compression ratio limit of Timelapse to shorten the compression time. Enhanced the compatibility of ONVIF and Generic camera setup.

Fixed Issues

• Fixed an issue where Archive Vault tasks might not execute normally.
• Fixed an issue where Surveillance Station might not run normally after hard drive migrations.
• Fixed an issue where Timelapse might not function normally during daylight saving time.
• Fixed an issue where event notifications might not attach snapshots correctly.
• Fixed an issue where LiveView might not be able to dewarpe images of fisheye cameras correctly.
• Minor bug fixes.

(2019-07-04)

Important Note

1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.
2. Surveillance Station 8.2.5 must be installed on Synology products running DSM 6.0-7321 and above.
3. Surveillance Station 8.2.5 supports Surveillance Station Client 1.2.0 and above.
4. Surveillance Station 8.2.5 supports VS360HD 4.3.0 and above.
5. Surveillance Station 8.2.5 supports VS960HD 2.3.4 and above.

Fixed Issues

1. Adjusted Gmail notification authentication mechanism to comply with the new Gmail API.

(2019-06-11)

Compatibility and Installation

1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.
2. Surveillance Station 8.2.4 must be installed on Synology products running DSM 6.0-7321 and above.
3. Surveillance Station 8.2.4 supports Surveillance Station Client 1.2.0 and above.
4. Surveillance Station 8.2.4 supports VS360HD 4.3.0 and above.
5. Surveillance Station 8.2.4 supports VS960HD 2.3.4 and above.

Fixed Issues

1. Optimized database stability and reduced the chance of database corruption due to power outages.
2. Fixed an issue where multiple camera connections from DS cam might not disconnect normally and cause high NAS memory usage.
3. Fixed an issue where cameras might not be migrated successfully with excessive recordings.
4. Fixed an issue where Archive Vault tasks might execute repeatedly under certain conditions.
5. Minor bug fixes

(2019-01-25)

Compatibility and Installation

1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.
2. Surveillance Station 8.2.3 must be installed on Synology products running DSM 6.0-7321 and above.
3. Surveillance Station 8.2.3 supports Surveillance Station Client 1.2.0 and above.
4. Surveillance Station 8.2.3 supports VS360HD 4.3.0 and above.
5. Surveillance Station 8.2.3 supports VS960HD 2.3.4 and above.

New Features

1. Added support for privilege profiles to be applied to group users.
2. Added support for more user operations in Log.
3. Introduced the new Video Transcoder application, allowing videos to be easily transcoded into a format compatible with Surveillance Station.
4. Added support for a quick setup of ONVIF cameras.
5. Added support for restarting cameras after disconnection to stabilize connectivity.
6. Added support for a video preview after Action Rule events are triggered.
7. Added support for access control and intercom functions in Action Rule.
8. Added support for cardholder access events in Action Rule.
9. Added support for client name customization.
10. Added support for notifications when clients are disconnected or logged out.
11. Added support for notifications when Archive Vault tasks are running too slowly.
12. Optimized the camera search function by excluding previously added cameras.
13. Added support for specified-time-period searches (e.g. every Monday, 0:00-0:15 ) in Recording.
14. Added support for PTZ controls to be disabled in Live View.
15. Added support for appointing the hiding time of the mouse and yellow focus frame in Live View and Timeline.
16. Added support for fixed aspect ratio in E-Map.

Fixed Issues

1. Fixed a security vulnerability (Synology-SA-19:03).
2. Fixed an issue where the archive rotation of Smart Time Lapse might send incorrect messages.
3. Fixed an issue where snapshots might not be attached to Notification mails on certain NAS models.
4. Fixed an issue where Live View videos might not be played correctly on certain NAS models.
5. Fixed an issue where expansion units might not record normally after its storage space is recovered.
6. Fixed an issue where IP addresses might be altered if VisualStation firmware is updated remotely.

(2018-11-08)

Compatibility and Installation

1. Surveillance Station 8.2.2 must be installed on Synology products running DSM 6.0-7321 and above.
2. Surveillance Station 8.2.2 supports Surveillance Station Client 1.2.0 and above.
3. Surveillance Station 8.2.2 supports VS360HD 4.3.0 and above.
4. Surveillance Station 8.2.2 supports VS960HD 2.3.0 and above.

Fixed Issues

1. Fixed a security vulnerability (Synology-SA-18:58)

(2018-10-18)

Compatibility and Installation

1. Surveillance Station 8.2.1 must be installed on Synology products running DSM 6.0-7321 and above.
2. Surveillance Station 8.2.1 supports Surveillance Station Client 1.2.0 and above.
3. Surveillance Station 8.2.1 supports VS360HD 4.3.0 and above.
4. Surveillance Station 8.2.1 supports VS960HD 2.3.0 and above.

Fixed Issues

1. Fixed an issue where the memory usage of NAS devices might increase under certain conditions.
2. Fixed an issue where archive rotation might continue to send notifications without being triggered.
3. Fixed an issue where domain users might not be able to use applications with Dual Authorization properly.
4. Fixed an issue where snapshots might not be attached in email notifications.
5. Fixed an issue where notifications of the iOS build-in email application might wrongly show that there are multiple attachments in an email.
6. Fixed an issue where edited camera settings might not be applied when the share stream path is set as permanent.
7. Minor bug fixes.

(2018-10-02)

Compatibility and Installation

1. Surveillance Station 8.1.6 must be installed on Synology products running DSM 6.0-7321 and above.
2. Surveillance Station 8.1.6 supports Surveillance Station Client 1.1.2 to 1.1.5.
3. Surveillance Station 8.1.6 supports VS360HD 4.2.2 to 4.2.5.
4. Surveillance Station 8.1.6 supports VS960HD 2.2.2 to 2.2.5.
5. This is the last version that supports Surveillance Station Plugin. For Surveillance Station versions 8.2 and above, please use the HTML5 solution on Chrome or the high performance Surveillance Station Client desktop client as an alternative.

Fixed Issues

1. Optimized database stability and reduced the chance of database corruption due to power outages.
2. Fixed an issue where data transfer might fail when upgrading from Surveillance Station 6.1 or below.
3. Fixed an issue where cameras might stop recording under certain conditions.
4. Fixed an issue where the system performance might be affected if the cache space is filled by alert events.
5. Fix an issue where video servers might not be properly paired with the host server due to account-name capitalization recognition problems.

(2018-09-13)

Compatibility and Installation

1. Surveillance Station 8.2 must be installed on Synology products running DSM 6.0-7321 and above.

2. Surveillance Station 8.2 supports Surveillance Station Client 1.2.0 and above.

3. Surveillance Station 8.2 supports VS360HD 4.3.0 and above.

4. Surveillance Station 8.2 supports VS960HD 2.3.0 and above.

5. The web-based Surveillance Station interface now uses HTML5 player, allowing you to view videos without installing plugins. Learn more on the compatibility.

What’s New

1. Introduced the new mobile application Synology LiveCam, allowing users to download it for free and turn their mobile devices into IP cameras.

2. Introduced the new Smart Time Lapse application that can shorten lengthy videos into seconds or minutes.

3. Introduced the new Live Broadcast application with a intuitive interface that allows users to stream live videos to YouTube.

4. Introduced the new Dual Authorization application that restricts users from operating sensitive functions (such as access to archives) unless they are authorized by another party.

5. Supports the new IP speaker devices, allowing users to broadcast in real time or periodically play recordings on multiple IP speakers. Please refer to Surveillance Station IP Speaker Support List for more information.

6. Introduced the new transaction compatibility tool that can test the compatibility of transaction devices before users deploy them with Surveillance Station. (Go to download page)

7. Introduced the new transaction simulation tool which supports TCP and can be added to Surveillance Station for tryouts before users obtain a physical transaction device. (Go to download page)

8. The updated Application Center provides over 20 advanced applications to meet various user needs.

9. The updated Help application added 10 detailed tutorials and guides.

10. Optimized the Timeline application by providing the event filter function and supporting playback rates up to 32x.

11. Optimized the Live View application by improving the Alerts interface and allowing users to play selected layouts successively.

12. Optimized the Archive Vault application by improving its functions and connection.

13. Optimized the Client Management application by allowing users to change the Live View layouts and update VisualStation firmware remotely.

14. Optimized the Camera Edit interface by adjusting the location of Settings and moving Event Detection and I/O Port to the Camera Edit page.

15. Optimized the Notification application by adding support for continuous snapshots within a specified interval after events are detected.

16. Optimized the User Defined Camera interface by adding support for uploading mp4 videos as virtual cameras.

17. Added support for file sharing, allowing users to share the download and view links of recording files conveniently.

18. Added support for the mute mode in Notifications, so that notifications can be suspended for a certain period of time.

19. Added support for uploading SVG images as e-maps.

20. Added support for binding events such as PIR detection and ACAP detection to motion detection (camera supports required). A bonded event will be viewed as a motion detection event and will thus trigger corresponding actions.

21. Added support for multi keyword search, and support for downloading of recordings and data in the Transaction application.

Fixed Issues

1. Optimized the CMS connection to reduce connection traffic between the host server and the recording server.

2. Fixed an issue where the Btrfs file system might run slowly due to the fragmentation of usable storage space when multiple cameras are recording simultaneously.

3. Fixed an issue where the Surveillance Station display time might be incorrect in specific time zones.

4. Fixed an issue where the system performance might slow down under limited transmission speed because of the lack of cache.

5. Fixed a minor issue where Surveillance Station might pause when the system is writing log files.

(2018-05-23)

Compatibility and Installation

1. Surveillance Station 8.1.5 must be installed on Synology products running DSM 6.0-7321 and above.

2. Surveillance Station 8.1.5 supports Surveillance Station Client 1.1.2 and above.

3. Surveillance Station 8.1.5 supports VS360HD 4.2.2 and above.

4. Surveillance Station 8.1.5 supports VS960HD 2.2.2 and above.

What's New

1. Updated Synology's terms and conditions for EU data privacy compliance.

2. Thai user interface is now available (with DSM 6.2 and above).

Fixed Issues

1. Fixed an issue where Archive Vault tasks with local host as the archiving source, may not run properly after the DSM port settings have been changed.

(2018-04-10)

Compatibility and Installation

1. Surveillance Station 8.1.4 must be installed on Synology products running DSM 6.0-7321 and above.

2. Surveillance Station 8.1.4 supports Surveillance Station Client 1.1.2 and above.

3. Surveillance Station 8.1.4 supports VS360HD 4.2.2 and above.

4. Surveillance Station 8.1.4 supports VS960HD 2.2.2 and above.

Fixed Issues

1. Enhanced the memory usage mechanism of the Archive Vault tasks.

2. Fixed an issue where the motion detection function of certain cameras may not work properly.

3. Fixed an issue where the system may continuously restart the cameras when the Btrfs file system is under high loading environment.

4. Fixed an issue where cameras may not be edited when the recording storage folder is not set up yet.

5. Fixed an issue where downloaded recording files may not be played on Windows Media Player when the audio option is enabled in the camera settings page on a user defined camera that does not support audio.

6. Fixed an issue where Gmail can not be configured in the Notification application after updating Google Chrome to versions 63.0 and above.

7. Fixed an issue where the time may be incorrectly displayed on the Recording application under special time zones.

8. Minor bug fixes.

(2017-12-27)

Compatibility and Installation

1. Surveillance Station 8.1.3 must be installed on Synology products running DSM 6.0-7321 and above.

2. Surveillance Station 8.1.3 supports Surveillance Station Client 1.1.2 and above.

3. Surveillance Station 8.1.3 supports VS360HD 4.2.2 and above.

4. Surveillance Station 8.1.3 supports VS960HD 2.2.2 and above.

Fixed Issues

1. Fixed an issue where the motion detection function of Foscam cameras may not work properly.

2. Fixed an issue where the status of surveillance devices may be abnormal under certain network environments when recording servers cannot access the host server directly.

3. Fixed an issue where the "Enable live view pop-up windows" function may be triggered continuously once the I/O module has detected events.

(2017-12-14)

Compatibility and Installation 

1. Surveillance Station 8.1.2 must be installed on Synology products running DSM 6.0-7321 and above.

2. Surveillance Station 8.1.2 supports Surveillance Station Client 1.1.2 and above.

3. Surveillance Station 8.1.2 supports VS360HD 4.2.2 and above.

4. Surveillance Station 8.1.2 supports VS960HD 2.2.2 and above.

5. Surveillance Station 8.1.2 supports the updated Quickconnect mechanism on DSM 6.2. We suggest you install Surveillance Station 8.1.2 or above version if you are using the Quickconnect service while running on DSM 6.2 or above.

6. Surveillance Station Plugin is not supported on macOS 10.13 and above. Users using macOS 10.13 can use the HTML5 solution on Chrome, or the high performance Surveillance Station Client desktop client as an alternative.

What's New

1. Added support for the AXIS Barcode Reader. Users can now install the AXIS Barcode Reader package on selected AXIS cameras and pair with Surveillance Station Transactions application to overlay barcode information on the video.Learn More.

2. Added support for the AXIS Camera Application Platform (ACAP) official application - AXIS Tailgating Detector. Learn More.

3. Significantly improved the Transactions application by providing more video overlay options and other WebAPI for third party integration.

4. Significantly improved the Archive Vault application by providing more recording archiving detailed settings.

5. Added support to control the lens moving speed of PT cameras according to the operating amplitude of the joystick.

6. Added support for the Live View layout sequence function. Users can now play different layouts sequentially in Live View.

7. Added support to specify the size of the storage space. Administrators can now manage the total storage space not only by limiting each camera space but also by limiting the total storage space.

8. Added support for the "Ignore short-lived motion" function on Surveillance Station motion detection to reduce false alarms in specific environments.

9. Added support for providing the option to display or name snapshots by "snapshot taken time" or "video recorded time".

10. Added support to lower the minimum value of snapshot folder space from 1GB to 10 MB for more flexible deployment.

11. Added support for providing filename details of rotated recordings in the Log application.

12. Added support for providing information in Home Mode notifications such as Home Mode trigger reasons and the users who triggered Home Mode.

13. Enhanced the mechanism that automatically repairs system database error caused by unexpected power failure.

14. Enhanced the recording rotation mechanism to improve the performance during recording rotation.

Fixed Issues

1. Fixed multiple security vulnerabilities (Synology-SA-17:77).

2. Fixed an issue where the Surveillance Station package may continue to remain at the "stopped" status when disabling the package.

3. Fixed an issue where the recording server may not be able to connect to the host server when the recording server is using the High-Availability service with more than 3 LAN ports under specific CMS environments.

4. Fixed an issue where the %COMPANY_NAME%, %DATE%, and %TIME% parameters may not be displayed properly.

5. Fixed an issue where camera stream sharing paths may change after the Surveillance Station package is updated even when the expiration duration is set to unlimited.

6. Fixed an issue where the Timeline application may not be opened under special timezones (GMT-3:30, GMT-9:30, GMT+8:30).

7. Fixed an issue where pairing cameras in the Door Controller application may fail in Surveillance Station web client.

8. Fixed an issue where Surveillance Station deletes access rules which are not recorded in Surveillance Station after users manually modify access rules through the access controller's web client.  

9. Fixed an issue where the corresponding camera preview does not pop up in Live View when I/O modules in E-Map have triggered alerts, even when the "Enable live view pop-up windows" function in the Live View application is enabled.

(2017-09-19)

Compatibility and Installation

1. Surveillance Station 8.1.1 must be installed on Synology products running DSM 6.0-7321 and above.

2. Surveillance Station 8.1.1 supports Surveillance Station Client 1.1 and above.

3. Surveillance Station 8.1.1 supports VS360HD 4.2. and above.

4. Surveillance Station 8.1.1 supports VS960HD 2.2. and above.

Fixed Issues

1. Fixed an issue where Surveillance Station cannot be launched when logging in as domain users.

2. Fixed an issue where Surveillance Station may not be launched when using HTTPS connection on Safari.

3. Fixed an issue where notifications may not be sent properly.

4. Fixed an issue where logs cannot be shown correctly under firmware version 1.60 of AXIS Door Controller.

5. Enhanced the live view alert mechanism of Transactions.

(2017-09-14)

Compatibility and Installation

1. Surveillance Station 8.0.7 must be installed on Synology products running DSM 6.0-7321 and above.

2. Surveillance Station 8.0.7 supports Surveillance Station Client versions from 1.0.4 to 1.0.6.

3. Surveillance Station 8.0.7 supports VisualStation versions from 4.1.2 to 4.1.4 and above.

What’s New

1. Added support for providing a WebAPI connection method for the Transactions application.

2. Added support for the report feature of the Transactions application.

3. Enhanced the mechanism for checking disconnection of AXIS Door Controllers.

Fixed Issues

1. Fixed an issue where logs cannot be shown correctly under firmware version 1.60 of AXIS Door Controller.

2. Fixed an issue where API ID information may not be properly configured in SMS notifications.

3. Fixed an issue where notifications may be sent continuously when cameras are disconnected during motion detection.

4. Fixed an issue where certain parameters may not be shown correctly in push service of the notification.

5. Fixed an issue where notifications may not be sent properly.

6. Fixed an issue where the archive rotation mechanism of the Transactions application may be abnormal.

7. Fixed an issue where the recording files downloaded from specified video clips may not be authenticated properly with Synology Evidence Integrity Authenticator. (Please use Synology Evidence Integrity Authenticator 1.2.0 or above.)

(2017-08-24)

Compatibility and Installation

1. Surveillance Station 8.1 must be installed on Synology products running DSM 6.0-7321 and above.

2. Surveillance Station 8.1 added support for transaction devices, and each newly added transaction device requires purchasing 2 additional licenses and will be counted as surveillance devices, just like IP cameras, I/O modules, and AXIS Door Controller.

3. Surveillance Station 8.1 supports VisualStation 4.2 and above.

4. Surveillance Station 8.1 supports Surveillance Station Client 1.1 and above.

What’s New

1. Introduced the new Archive Vault application to provide an advanced remote recording archiving function.

2. Introduced the new Home Mode application for users to set two different security settings in advance, and switch between these two settings manually, via a schedule, or by Geofence.

3. Introduced the new Transactions application for simultaneously monitoring transaction details and videos.

4. Added support for using preview, live view, recording playback, and timeline functions in Chrome. (Chrome currently only supports up to a maximum of 36 video channels. For more information, please refer to this article.)

5. Added support for the GPU decoding function on the Windows version of Surveillance Station Client to enhance video playing performance.

6. Added intercom camera integration for offering video surveillance, doorbell, door lock operation, two-way audio, and more functions.

7. Added the desktop widget feature for supporting the Client Management and Home Mode applications.

8. Added support for auto logout after an idle period to improve security.

9. Added support for setting the number of days to keep files in the Snapshot application.

10. Added support for giving spectators the privilege to set digital output.

11. Added support for CMS function in the archive settings tab of the Log application.

12. Added support for pairing cameras and saving the triggered messages based on each port of the I/O module.

13. Added support for sorting and batch editing cardholders in the AXIS Door Controller application.

14. Added support for non-admin users to use the AXIS Door Controller application.

15. Added support for dynamic frame rate of AXIS camera models.

16. Added support for enabling the force to rotate recordings option in the Advanced tab of the Recording application.

17. Added support for enabling the auto login function for Local Display on the web client.

Fixed Issues

1. Fixed an issue where downloaded recording files may still include audio when the user has no audio privilege.

(2017-08-08)

Compatibility and Installation

1. Surveillance Station 8.0.6 must be installed on Synology products running DSM 6.0-7321 and above.

2. Surveillance Station 8.0.6 supports VisualStation 4.1.2 and above.

3. Surveillance Station 8.0.6 supports Surveillance Station Client 1.0.4 and above.

Fixed Issues

1. Fixed an issue where sending notifications or recording logs may not be executed when the camera connection is recovered.

2. Fixed an issue where videos in Live View may not be played when enabling the multicast feature of the camera on Safari and Internet Explorer.

(2017-07-19)

Compatibility and Installation

1. Surveillance Station 8.0.5 must be installed on Synology products running DSM 6.0-7321 and above.

2. Surveillance Station 8.0.5 added support for transaction devices, each newly added transaction device requires purchasing 2 additional licenses and will be counted as surveillance devices, just like IP cameras, I/O modules and AXIS Door Controller.

3. Surveillance Station 8.0.5 supports VisualStation 4.1.2 and above.

4. Surveillance Station 8.0.5 supports Surveillance Station Client 1.0.4 and above.

What’s New

1. Added support for the Transactions application for simultaneously monitoring transaction details and videos.

2. Enhanced the accessing speed of the log for the AXIS Door Controller application.

Fixed Issues

1. Fixed an issue where live feeds of user defined cameras may not be displayed properly when leaving the source path empty.

2. Fixed an issue where manual recording may not be stopped properly due to insufficient storage capacity. 

3. Fixed an issue where events may still be received when deselecting Log Event in the log of the AXIS Door Controller application.

(2017-06-20)

Compatibility and Installation

1. Surveillance Station 8.0.4 must be installed on Synology products running DSM 6.0-7321 and above.

What’s New

1. Enhanced the video and audio synchronization mechanism.

Fixed Issues

1. Fixed an issue where recordings may fail to be played due to the wrong video stream format from certain cameras.

2. Fixed an issue where the force time synchronization feature may not function properly when disabling NTP server of the camera.

3. Fixed an issue where the memory of the NAS may be over consumed when cameras use H.265 codec.

4. Fixed an issue where AXIS Door Controller may fail to be added under certain settings.

5. Fixed an issue where the recording file records may not be accessed when restarting the NAS after encrypting the camera folder on DSM.

6. Enhanced archive rotation mechanism to prevent the recording function from not functioning properly when the storage space has reached full capacity.

(2017-04-25)

Compatibility and Installation

1. Surveillance Station 8.0.3 must be installed on Synology products running DSM 6.0-7321 and above.

Fixed Issues

1. Fixed an issue where the certificate for the Mac version has been expired.

2. Minor bug fixes.

(2017-04-25)

Compatibility and Installation

1. Surveillance Station 7.2.6 must be installed on Synology products running DSM 6.0-7321 and above.

Fixed Issues

1. Fixed an issue where the certificate for the Mac version has been expired.

2. Minor bug fixes.

(2017-03-22)

Compatibility and Installation

1. Surveillance Station 8.0.2 must be installed on Synology products running DSM 6.0-7321 and above.

What’s New

1. Added new "High performance” and “High quality” video scaling options in Video Settings.

2. Added support for 9x9 and 10x10 channel layout.

3. Added support for sending Surveillance Station logs to a Syslog Server.

4. Added support for authorizing camera add/delete, e-map, I/O module, and layout privileges for managers.

5. Added support for attaching snapshots to AXIS Door Controller notifications.

6. Added support for setting the PIN length for AXIS Door Controller A1001.

7. Added support for AXIS speed dry function.

8. Added support for managing cameras paired with AXIS Door Controller in Live View Alert.

9. Added support for selecting multiple video channels when adding or editing AXIS generic models.

10. Enhanced the fluency of playing live view videos.

11. Enhanced the compatibility of user define stream path format.

Fixed Issues

1. Fixed an issue where the system may be abnormal if unusual interruptions occur during the upgrade of Surveillance Station.

2. Fixed an issue where the archiving rule may reset after editing the brand and model of the camera.

3. Fixed an issue where spectators may view unauthorized connected client lists in the Client Management application.

(2017-02-16)

Fixed Issues

1. Fixed an issue where Gmail can not be configured in the Notification application.
2. Fixed an issue where the Live View Analytics application may not be closed when using Firefox browser.
3. Minor bug fixes.

(2017-02-14)

Compatibility and Installation

1. Surveillance Station 7.2.5 must be installed on Synology products running DSM 6.0-7321 and above.
2. This is the last version that supports using access controllers with no additional charges. In Surveillance Station 8.0 and above, each newly added access controller requires purchasing an additional license and will be counted as one surveillance device, just like IP cameras and I/O modules.

What’s New

1. Added support for AXIS Door Controller A1001 with 1.5x firmware.

Fixed Issues

1. Fixed an issue where Gmail cannot be configured in the Notification application.
2. Fixed an issue where under certain circumstances, Smart Search may end before searching through all events.
3. Fixed an issue where the two-way audio may not function properly when Surveillance Station is logged in via QuickConnect.
4. Fixed an issue where the Live View Analytics application may not be closed when using Firefox and Safari browsers.
5. Fixed an issue where error may be displayed on AXIS Entry Manager when adding an access rule for AXIS Door Controller A1001.
6. Fixed an issue where the last entry time of the cardholder may be incorrectly displayed when AXIS Door Controller A1001 encounters an access denied event.

(2017-01-24)

Fixed Issues

1. Fixed an issue where action rules may become invalid when you configure certain settings in the CMS architecture.
2. Minor bug fixes.

(2017-01-18)

Compatibility and Installation

1. Surveillance Station 8.0.0 must be installed on Synology products running DSM 6.0-7321 and above.
2. This is the first official version to support Surveillance Station Client.
3. In Surveillance Station 8.0 and above, each newly added access controller requires purchasing an additional license and will be counted as one surveillance device, just like IP cameras and I/O modules.
4. Ended support for PSIA protocol.

What's New

1. Added failover feature for recording servers to ensure maximum uptime of surveillance services.
2. Added support for switching among multiple live-view streams manually or automatically based on different events.
3. Added support for automatically switching among multiple video recording streams based on different events.
4. You can now set up multiple events in a rule to trigger actions in the Action Rule application.
5. You can now select “One time” or “Constant” event trigger types  in the Action Rule application to set up more flexible and powerful action rules.
6. Added support for AXIS Camera Application Platform (ACAP) official suites including Perimeter Defender, Digital Autotracking, Cross Line Detection, and Video Motion Detection.
7. Added support for camera's PIR motion detection.
8. Added support for H.265 video codec, Hikvision camera models’ H.264+ video codec, and Smart Codec function of Zavio camera models.
9. Added live view pop-up window alert function in the Live View application.
10. You can now download a specified video clip of a recording file.
11. You can now set up a permanent stream sharing path.
12. Added support for archive rotation function in the Log application.
13. Added the Client Management application for managing clients' connections.
14. Added support for adjusting time interval of notification combination to enhance the flexibility between user requirement and server loading.
15. Resource monitor is now available to display information on network traffic, memory usage, and CPU loading of Synology NAS/NVR devices.
16. You can now determine whether to display the time on server or client.
17. Enhanced system responsiveness and the immediacy of automatic page updates.
18. Added support for advanced filter function in the Snapshot application.
19. Added support for changeable snapshot storage path to facilitate data management.
20. Added support for audio of "User Define" cameras.
21. View permissions on recording servers are now configurable.
22. Added new "Digital input inactive" event and "Stop action rule recording" action in the Action Rule application.
23. Added support for synchronizing cardholder data from AXIS Door Controller A1001 to Surveillance Station.
24. Added support for AXIS Door Controller A1001 with 1.5x and 1.4x firmware.

Fixed Issues

1. Enhanced the startup speed of user application when system has too many Surveillance Station domain users.
2. Fixed an issue where services may be interrupted when Surveillance Station restarts due to changes in the IP address on Synology NAS. .
3. Fixed an issue where the last access duration of all cardholders may be incorrect when AXIS Door Controller A1001 encounters an access denied event.
4. Fixed an issue where error is displayed on AXIS Entry Manager when adding an access rule for AXIS Door Controller A1001.
5. Fixed an issue where the two-way audio may not function properly when Surveillance Station is logged in via QuickConnect.
6. Fixed an issue where preset positions of certain cameras may be cleared after added to Surveillance Station.

(2016-10-18)

Compatibility and Installation

1. Surveillance Station 7.2.4 must be installed on Synology products running DSM 6.0-7321 and above.

What's New

1. Added support for adding additional Surveillance Device License Packs to NVR216 (4CH) to expand its capability to up to 9 IP cameras or I/O modules.
2. Added support for video dewarping according to the current mount type of camera during recording playback.
3. Enhanced the performance of Live View and the system.

Fixed Issues

1. Fixed an issue where the volumes hosting recording shared folders may not be displayed properly during the installation of Surveillance Station package.
2. Fixed an issue where the archive rotation rules may not function properly to remove old recordings in an unstable connection between Synology NAS and remote recording storage.
3. Fixed an issue where incorrect messages may pop up when a camera edit page for generic models is opened.
4. Fixed an issue where the Local Display user's interface on NVR216 may not display properly after showing the startup logo.
5. Fixed an issue where the status of recording servers may not show correctly upon switch of LAN port on the CMS host server.

(2016-08-02)

Compatibility and Installation

1. Surveillance Station 7.2.3 must be installed on Synology products running DSM 6.0-7321 and above.

What's New

1. External event links created by Surveillance Station could now be applied as trigger in Action Rule application directly.
2. Remote folders of which the names contain double quotation marks can now be mounted as recording storages..

Fixed Issues

1. Enhanced the Live View stability on certain Synology NAS/NVR models.
2. Enhanced the responsiveness when editing VisualStation's Live View layout from the web browser.
3. Fixed an issue where the archive rotation rules may not function properly to remove old recordings in local and/or remote folders.
4. Fixed an issue where playback of certain camera with audio recordings may cause the Surveillance Station to function properly.
5. Fixed an issue adding or editing user defined cameras may not work properly under some certain circumstance.
6. Fixed an issue when exporting camera setting may not work properly after upgrading Surveillance Station.
7. Enhanced the connection stability of I/O modules.
8. Fixed an issue where the camera may not restore its connection automatically after the Synology NAS/NVR resumed from the faulty connection.
9. Fixed an issue where editing the multiple stream settings on the recording servers via the CMS host may cause the Timeline app in the connected VS360HD's not working properly.
10. Fixed an issue where the Live View Analytic may not function properly under certain situations.
11. Fixed an issue where the syncing of recording storages via Cloud Sync and/or Cloud Station may not work properly.
12. Fixed an issue under some rare circumstance the camera's constant bitrate (CBR) setting may not be set up properly.
13. Fixed and issue where certain camera's PTZ speed cannot be configured properly.
14. Fixed an issue where the playback of event logged videos created by Axis Door Controller may not work properly.
15. Fixed an issue where the connection status may not update in time when an IP camera is accidentally disconnected from Surveillance Station.

(2016-06-21)

Compatibility and Installation

1. Surveillance Station 7.2.2 must be installed on Synology products running DSM 6.0-7321 and above.

What’s New

1. Higher level of integration with Axis Door Controller A1001 provides more configurable advanced settings in Surveillance Station.
2. Enhanced the performance of AXIS Door Controller A1001 by redesigning the pairing mechanism. The old mechanism of AXIS Peer Connection is no longer supported.
3. Added support to set mounted CIFS folders as recording storage.
4. Added support for DPI and zoom in/ out display in web browsers.
5. Added support of recording database re-index to fix the inconsistency of recording list and the physical recording files.
6. Added generic camera API support from HikVision to enhance the compatibility for its upcoming surveillance product models.
7. Added new function to automatically fix system database error caused by unexpected power failure.
8. Enhanced privilege settings for administrators to manage export/mount recording privileges.
9. Administrators now can view the account information of events' operators in Log application.

Fixed Issues

1. Enhanced Timeline seeking performance.
2. Enhanced Live View stability.
3. Enhanced compatibility of H.264 high profile codec of HikVision cameras.
4. Optimized stream connection mechanism to prevent out-of-memory issue under high loading environment.
5. Adjusted the options in PTZ Speed Control page: the option of "Keep original camera settings" will not be configurable if the camera does not support the speed settings.
6. Fixed an issue where Surveillance Station may restart when logged in via QuickConnect.
7. Fixed an issue where the recording rotation may not work properly when a recording size is over 2GB.
8. Fixed an issue where all recipients may not receive event snapshots just because the verification of only some recipients fails.
9. Fixed an issue where users may not log in to Surveillance Station normally when using DSM alias.
10. Fixed an issue where the recordings may not be deleted normally under certain circumstances.
11. Fixed an issue where the live-view stream may not display normally when live view and recording are streamed separately with multicast being enabled.
12. Fixed an issue where the live-view stream on DS cam for iOS may not display correctly when mobile and recording streams are set as different ones.
13. Fixed an issue where migrating/mounting recordings from recording server may not work properly when the recording server is in a domain.

(2016-03-29)

Compatibility and Installation

1. Surveillance Station 7.2.1 can only be installed on Synology products running DSM 6.0 official or later.

What's New

1. Facilitates user's operation by adding the "auto" layout in Live View to display video feeds from normally connected cameras.
2. Users can now determine to show which event types in Log application.
3. Added support for the events of live-view analytics to trigger the actions in Action Rule.
4. CMS architecture can now be set up via QuickConnect and HTTPS.
5. Notifications of the same event types can now be combined to enhance the system efficiency of large scale project and avoid users from receiving excessive messages within a short while.
6. Added the online source of Help articles for users to get access to the most updated information.
7. Added support for the periodic time synchronization for cameras to keep their time consistent with that of Surveillance Station.
8. Added support for the periodic restart of cameras to stabilize their connectivity.
9. Added support to adjust keyframe interval for HikVision, Vivotek, Foscam, and Dahua cameras to enhance the flexibility between streaming quality and network bandwidth.
10. Enhanced the compatibility of AXIS cameras, including the setting of dynamic keyframe interval; the settings of motion detection area and history are configurable when the cameras are set as the detection source.
11. Enhance the UI responsiveness during both fast forwarding and high bit rate videos playback.
12. Enhanced the connectivity of AXIS Door Controller to lower the occurrences of continuous disconnection and reconnection messages.
13. Enhanced the E-map editing feature; added the option to change the device icon size and hide device name are now configurable for the large scale project setup.
14. Enhanced the batch edit feature in the Setting page of Notification.
15. Facilitates third-party applications to integrate with Surveillance Station by providing command paths for Action Rule or Notification triggered by external devices.

Fixed Issues

1. Fixed an issue where the number of AXIS door controllers may be incorrect in certain circumstances.
2. Fixed an issue where the statuses may be incorrect in Action Rule in certain circumstances.
3. Fixed an issue where the video recording triggered by events may not work properly after the change in the system time.

(2016-03-24)

Compatibility and Installation

1. Surveillance Station 7.2 can only be installed on Synology products running DSM 6.0 official or later.

What's New

1. Added support for DSM 6.0 official.
2. Surveillance Station has been optimized for models based on Intel 64-bit processors to improve general performance.
3. Added support for running Surveillance Station on both Virtual DSM and Docker DSM. (Please note that Surveillance Station running on Virtual DSM or Docker DSM does not include any default surveillance device licenses.)
4. Added support for 2-step verification using one-time password (OTP) for DSM 6.0 to provide extra security.