Release Notes for DS1522+

Version: 7.1.1-42951 Release Candidate


(2022-08-10)

Important Notes

  1. Starting from this version, the bad sector count column will not be displayed along with hard drive information. Users should go to each drive's Health Info > History to view its complete bad sector information. To determine whether bad sectors are affecting the drive, see if there's a significant increase in the number of bad sectors over time.
  2. Adjusted how the system calculates the estimated lifespan for M.2 NVMe SSDs to provide a more accurate estimation.

What’s New

  1. Added support for recipient profiles for email notifications, allowing users to add multiple email addresses under each profile and customize rules for the profiles.
  2. Users can now enable the quota setting for shared folders that are located on volumes with data deduplication enabled.
  3. Added support for RAID arrays with 16 and 20 hard drives when creating RAID groups.
  4. Supports checking the 2-factor authentication status of user accounts at Control Panel > User & Group > Users.

Fixed Issues

  1. Fixed an issue where the "Enable UID/GID shifting" setting would be deactivated after modifying the time interval for updating the user/group list on an LDAP client.
  2. Fixed multiple security vulnerabilities regarding CIFS-utils (CVE-2022-27239, CVE-2022-29869).
  3. Fixed a security vulnerability regarding OpenLDAP (CVE-2022-29155).
  4. Fixed a security vulnerability regarding cURL (CVE-2022-22576).
  5. Fixed a security vulnerability regarding Zlib (CVE-2018-25032).
  6. Fixed a security vulnerability regarding Freetype (CVE-2022-27406).
  7. Fixed multiple security vulnerabilities regarding 802.1X (CVE-2021-30004, CVE-2021-30266).
  8. Fixed multiple security vulnerabilities regarding GNU C Library(CVE-2021-43396, CVE-2022-23218, CVE-2022-23219).
  9. Fixed multiple security vulnerabilities regarding YAML-cpp (CVE-2018-20573, CVE-2018-20574, CVE-2019-6285).
  10. Fixed multiple security vulnerabilities regarding Linux Kernel (CVE-2019-11477, CVE-2019-11478, CVE-2019-11479, CVE-2020-12770, CVE-2019-18282, CVE-2019-19527, CVE-2019-19532, CVE-2019-19537, CVE-2021-0605, CVE-2021-3732, CVE-2021-3739, CVE-2021-3753, CVE-2021-4149, CVE-2021-4203, CVE-2021-20317, CVE-2021-20321, CVE-2021-20322, CVE-2021-29154, CVE-2021-29650, CVE-2021-34556, CVE-2021-35477, CVE-2021-39633, CVE-2021-39698, CVE-2021-45868, CVE-2022-0185, CVE-2022-0330, CVE-2022-0617, CVE-2022-0847, CVE-2022-1011, CVE-2022-1048, CVE-2022-1055, CVE-2022-1353, CVE-2022-20008, CVE-2022-27666, CVE-2022-28893, CVE-2022-29582).
  11. Updated OpenSSL to version 1.1.1o to fix multiple security vulnerabilities (CVE-2022-1292, CVE-2021-3712, CVE-2022-0778).
  12. Updated libarchive to version 3.6.1 to fix multiple security vulnerabilities (CVE-2021-36976, CVE-2022-26280).
  13. Updated Mbed-TLS to version 2.28 to fix multiple security vulnerabilities (CVE-2021-44732, CVE-2021-45450, CVE-2021-43666).
  14. Updated Python to version 3.8.12 to fix multiple security vulnerabilities (CVE-2021-3733, CVE-2021-3737, CVE-2022-0391).
  15. Updated Redis to version 6.2.7 to fix multiple security vulnerabilities (CVE-2022-24735, CVE-2022-24736).
  16. Updated ISC DHCP to version 4.4.3 to fix a security vulnerability (CVE-2021-25217).

Remarques :

Version: 7.1-42661 Update 4


(2022-08-05)

Important notes

  1. Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it. Only Synology NAS with DSM 7.1 installed can be updated to this version.
    • The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.
    • Your DSM is working fine without having to update. The system evaluates service statuses and system settings to determine whether it needs to update to this version.
  2. This update will restart your Synology NAS.

Fixed Issues

  1. Fixed an issue where after restarting DSM, certain packages might fail to function properly if users had installed Synology High Availability.
  2. Fixed an issue where users might not be able to sign in to their Gmail account when configuring the sender at Control Panel > Notification > Email.

Version: 7.1-42661 Update 3


(2022-08-03)

Important notes

  1. Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it. Only Synology NAS with DSM 7.1 installed can be updated to this version.
    • The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.
    • Your DSM is working fine without having to update. The system evaluates service statuses and system settings to determine whether it needs to update to this version.
  2. This update will restart your Synology NAS.

Fixed Issues

  1. Fixed an unexpected issue that may occur when users Safe Ejected a single-volume storage pool that was created on DSM 6.2.4 or earlier.
  2. Fixed an issue where certain packages couldn't function properly shortly after restarting DSM.
  3. Fixed an unexpected issue that may occur when users tried to repair degraded storage pools that were previously migrated from a different version of DSM.

Known Issues

  1. We suggest that you stay with your current DSM version if you are using or plan to use Synology High Availability. This new version might cause certificate problems with SHA clusters. We will release a version including the patch for this issue in the upcoming weeks.

Version: 7.1-42661 Update 2


(2022-06-29)

Important notes

  1. Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it. Only Synology NAS with DSM 7.1 installed can be updated to this version.
    • The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.
    • Your DSM is working fine without having to update. The system evaluates service statuses and system settings to determine whether it needs to update to this version.
  2. This update will restart your Synology NAS.

Compatibility & Installation

  1. When an SSD's firmware version doesn't support the S.M.A.R.T test, the system will disable related functions.

Fixed Issues

  1. Fixed an issue where the out-of-band port couldn't function properly when users configured Link Aggregation with only the ports on the external network card.
  2. Fixed an issue where users couldn't configure access via QuickConnect for Synology Drive Server because they couldn't find the package at Control Panel > External Access > QuickConnect > Advanced.

Version: 7.1-42661 Update 1


(2022-06-29)

Important Note

  1. The update is expected to be available in all regions shortly. If you want to update your DSM to this version now, please click here.
  2. This update will restart your Synology NAS.
  3. If users' Synology NAS aren't connected to the Internet, they must download SMB Service 4.10.18-0434 from the Download Center and manually install it after the DSM update to make sure the package functions properly. Note: Before users install SMB Service 4.10.18-0434, the package and its dependent package, Synology Directory Server, will be deactivated.

Fixed Issues

  1. Fixed an issue where users couldn't upload files to DSM via the Finder on macOS Big Sur 11.
  2. Fixed multiple security vulnerabilities regarding Netatalk (Synology-SA-22:06).

Version: 7.1-42661


(2022/06/29)
  1. N/A. (This is the initial release of DS1522+)

Version: 7.1.1-42951 Release Candidate


(2022-08-10)

Important Notes

  1. Starting from this version, the bad sector count column will not be displayed along with hard drive information. Users should go to each drive's Health Info > History to view its complete bad sector information. To determine whether bad sectors are affecting the drive, see if there's a significant increase in the number of bad sectors over time.
  2. Adjusted how the system calculates the estimated lifespan for M.2 NVMe SSDs to provide a more accurate estimation.

What’s New

  1. Added support for recipient profiles for email notifications, allowing users to add multiple email addresses under each profile and customize rules for the profiles.
  2. Users can now enable the quota setting for shared folders that are located on volumes with data deduplication enabled.
  3. Added support for RAID arrays with 16 and 20 hard drives when creating RAID groups.
  4. Supports checking the 2-factor authentication status of user accounts at Control Panel > User & Group > Users.

Fixed Issues

  1. Fixed an issue where the "Enable UID/GID shifting" setting would be deactivated after modifying the time interval for updating the user/group list on an LDAP client.
  2. Fixed multiple security vulnerabilities regarding CIFS-utils (CVE-2022-27239, CVE-2022-29869).
  3. Fixed a security vulnerability regarding OpenLDAP (CVE-2022-29155).
  4. Fixed a security vulnerability regarding cURL (CVE-2022-22576).
  5. Fixed a security vulnerability regarding Zlib (CVE-2018-25032).
  6. Fixed a security vulnerability regarding Freetype (CVE-2022-27406).
  7. Fixed multiple security vulnerabilities regarding 802.1X (CVE-2021-30004, CVE-2021-30266).
  8. Fixed multiple security vulnerabilities regarding GNU C Library(CVE-2021-43396, CVE-2022-23218, CVE-2022-23219).
  9. Fixed multiple security vulnerabilities regarding YAML-cpp (CVE-2018-20573, CVE-2018-20574, CVE-2019-6285).
  10. Fixed multiple security vulnerabilities regarding Linux Kernel (CVE-2019-11477, CVE-2019-11478, CVE-2019-11479, CVE-2020-12770, CVE-2019-18282, CVE-2019-19527, CVE-2019-19532, CVE-2019-19537, CVE-2021-0605, CVE-2021-3732, CVE-2021-3739, CVE-2021-3753, CVE-2021-4149, CVE-2021-4203, CVE-2021-20317, CVE-2021-20321, CVE-2021-20322, CVE-2021-29154, CVE-2021-29650, CVE-2021-34556, CVE-2021-35477, CVE-2021-39633, CVE-2021-39698, CVE-2021-45868, CVE-2022-0185, CVE-2022-0330, CVE-2022-0617, CVE-2022-0847, CVE-2022-1011, CVE-2022-1048, CVE-2022-1055, CVE-2022-1353, CVE-2022-20008, CVE-2022-27666, CVE-2022-28893, CVE-2022-29582).
  11. Updated OpenSSL to version 1.1.1o to fix multiple security vulnerabilities (CVE-2022-1292, CVE-2021-3712, CVE-2022-0778).
  12. Updated libarchive to version 3.6.1 to fix multiple security vulnerabilities (CVE-2021-36976, CVE-2022-26280).
  13. Updated Mbed-TLS to version 2.28 to fix multiple security vulnerabilities (CVE-2021-44732, CVE-2021-45450, CVE-2021-43666).
  14. Updated Python to version 3.8.12 to fix multiple security vulnerabilities (CVE-2021-3733, CVE-2021-3737, CVE-2022-0391).
  15. Updated Redis to version 6.2.7 to fix multiple security vulnerabilities (CVE-2022-24735, CVE-2022-24736).
  16. Updated ISC DHCP to version 4.4.3 to fix a security vulnerability (CVE-2021-25217).

Remarques :

Version: 7.1-42661 Update 4


(2022-08-05)

Important notes

  1. Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it. Only Synology NAS with DSM 7.1 installed can be updated to this version.
    • The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.
    • Your DSM is working fine without having to update. The system evaluates service statuses and system settings to determine whether it needs to update to this version.
  2. This update will restart your Synology NAS.

Fixed Issues

  1. Fixed an issue where after restarting DSM, certain packages might fail to function properly if users had installed Synology High Availability.
  2. Fixed an issue where users might not be able to sign in to their Gmail account when configuring the sender at Control Panel > Notification > Email.

Version: 7.1-42661 Update 3


(2022-08-03)

Important notes

  1. Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it. Only Synology NAS with DSM 7.1 installed can be updated to this version.
    • The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.
    • Your DSM is working fine without having to update. The system evaluates service statuses and system settings to determine whether it needs to update to this version.
  2. This update will restart your Synology NAS.

Fixed Issues

  1. Fixed an unexpected issue that may occur when users Safe Ejected a single-volume storage pool that was created on DSM 6.2.4 or earlier.
  2. Fixed an issue where certain packages couldn't function properly shortly after restarting DSM.
  3. Fixed an unexpected issue that may occur when users tried to repair degraded storage pools that were previously migrated from a different version of DSM.

Known Issues

  1. We suggest that you stay with your current DSM version if you are using or plan to use Synology High Availability. This new version might cause certificate problems with SHA clusters. We will release a version including the patch for this issue in the upcoming weeks.

Version: 7.1-42661 Update 2


(2022-06-29)

Important notes

  1. Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it. Only Synology NAS with DSM 7.1 installed can be updated to this version.
    • The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.
    • Your DSM is working fine without having to update. The system evaluates service statuses and system settings to determine whether it needs to update to this version.
  2. This update will restart your Synology NAS.

Compatibility & Installation

  1. When an SSD's firmware version doesn't support the S.M.A.R.T test, the system will disable related functions.

Fixed Issues

  1. Fixed an issue where the out-of-band port couldn't function properly when users configured Link Aggregation with only the ports on the external network card.
  2. Fixed an issue where users couldn't configure access via QuickConnect for Synology Drive Server because they couldn't find the package at Control Panel > External Access > QuickConnect > Advanced.

Version: 7.1-42661 Update 1


(2022-06-29)

Important Note

  1. The update is expected to be available in all regions shortly. If you want to update your DSM to this version now, please click here.
  2. This update will restart your Synology NAS.
  3. If users' Synology NAS aren't connected to the Internet, they must download SMB Service 4.10.18-0434 from the Download Center and manually install it after the DSM update to make sure the package functions properly. Note: Before users install SMB Service 4.10.18-0434, the package and its dependent package, Synology Directory Server, will be deactivated.

Fixed Issues

  1. Fixed an issue where users couldn't upload files to DSM via the Finder on macOS Big Sur 11.
  2. Fixed multiple security vulnerabilities regarding Netatalk (Synology-SA-22:06).

Version: 7.1-42661


(2022/06/29)
  1. N/A. (This is the initial release of DS1522+)