Release Notes for Surveillance Device Pack

Surveillance Device Pack enhances the camera supports of Surveillance Station

Version: 6.2.0-6432

(2024-03-28)

What's New

  1. Added support for over 116 new IP camera models. Refer to the Surveillance Station IP Camera Support List.

Fixed Issues

  1. Fixed an issue where some Axis cameras may generate an extra stream when edge recording is enabled.
  2. Fixed an issue where audio out may not function for Amcrest AD410 cameras (firmware 1.000.00AC002.0.R and above).
  3. Fixed an issue where cameras might be unable to establish HTTPS connection with DSM 7.
  4. Fixed an issue where audio out may not function for Amcrest IP2M-841B-V3 cameras (firmware 2.800.0000000.15.R and above).

Version: 6.2.0-5432

(2024-03-28)

What's New

  1. Added support for over 116 new IP camera models. Refer to the Surveillance Station IP Camera Support List.

Fixed Issues

  1. Fixed an issue where some Axis cameras may generate an extra stream when edge recording is enabled.
  2. Fixed an issue where audio out may not function for Amcrest AD410 cameras (firmware 1.000.00AC002.0.R and above).
  3. Fixed an issue where cameras might be unable to establish HTTPS connection with DSM 7.
  4. Fixed an issue where audio out may not function for Amcrest IP2M-841B-V3 cameras (firmware 2.800.0000000.15.R and above).

Version: 6.1.4-6240

(2023-12-07)

What's New

  1. Added support for over 80 new IP camera models. Refer to the Surveillance Station IP Camera Support List.
  2. Added support for the new firmware version MX-V5.4.9.4 on MOBOTIX S16 cameras.
  3. Added support for the new firmware version 1.02.04 on D-Link DCS-8635LH cameras.

Fixed Issues

  1. Fixed an issue where specific Amcrest cameras might not be able to output audio.
  2. Fixed an issue where only one channel is available for Hikvision DS-2SE7C144IW-AE cameras.
  3. Fixed an issue where Chiyu BF-1010 cannot be added to Surveillance Station.
  4. Fixed an issue where the number of license used may be incorrect when adding Reolink TrackMix PoEs.
  5. Enhanced the compatibility of ONVIF profiles.

Version: 6.1.4-5240

(2023-12-07)

What's New

  1. Added support for over 80 new IP camera models. Refer to the Surveillance Station IP Camera Support List.
  2. Added support for the new firmware version MX-V5.4.9.4 on MOBOTIX S16 cameras.
  3. Added support for the new firmware version 1.02.04 on D-Link DCS-8635LH cameras.

Fixed Issues

  1. Fixed an issue where specific Amcrest cameras might not be able to output audio.
  2. Fixed an issue where only one channel is available for Hikvision DS-2SE7C144IW-AE cameras.
  3. Fixed an issue where Chiyu BF-1010 cannot be added to Surveillance Station.
  4. Fixed an issue where the number of license used may be incorrect when adding Reolink TrackMix PoEs.
  5. Enhanced the compatibility of ONVIF profiles.

Version: 6.1.3-6161

(2023-08-09)

Fixed Issues

  1. Fixed an issue where Netatmo cameras might be disconnected after Surveillance Station restarts.

Version: 6.1.3-5161

(2023-08-09)

Fixed Issues

  1. Fixed an issue where Netatmo cameras might be disconnected after Surveillance Station restarts.

Version: 6.1.2-6156

(2023-06-27)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 6.1.2-6156 is only compatible with Surveillance Station 9.1.2-10853 and above.

What's New

  1. Added support for over 27 new IP camera models. Refer to the Surveillance Station IP Camera Support List.

Version: 6.1.2-5156

(2023-06-27)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 6.1.2-5156 is only compatible with Surveillance Station 9.1.2-8853 and above.

What's New

  1. Added support for over 27 new IP camera models. Refer to the Surveillance Station IP Camera Support List.

Version: 6.1.1-6123

(2023-05-02)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 6.1.1-6123 is only compatible with Surveillance Station 9.1.1-10728 and above.

What's New

  1. Added support for over 27 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the new firmware on Reolink RLC-810A, RLC-811A, RLC-1210A, RLC-820A, and RLC-822A. Stream 1 and Stream 2 can be simultaneously used if video format H.264 was selected.
  3. Added support for a new brand "General" when adding third-party cameras manually. Surveillance Station will automatically identify compatible cameras for installation. (Incompatibility request form)

Fixed Issues

  1. Fixed an issue where the camera might remain at the status Activating after adjusting the audio format on specific AXIS cameras.

Version: 6.1.1-5123

(2023-05-02)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 6.1.1-5123 is only compatible with Surveillance Station 9.1.1-8728 and above.

What's New

  1. Added support for over 27 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the new firmware on Reolink RLC-810A, RLC-811A, RLC-1210A, RLC-820A, and RLC-822A. Stream 1 and Stream 2 can be simultaneously used if video format H.264 was selected.
  3. Added support for a new brand "General" when adding third-party cameras manually. Surveillance Station will automatically identify compatible cameras for installation. (Incompatibility request form)

Fixed Issues

  1. Fixed an issue where the camera might remain at the status Activating after adjusting the audio format on specific AXIS cameras.

Version: 6.1.0-6081

(2023-03-14)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 6.1.0-6081 is only compatible with Surveillance Station 9.1.0-10660 and above.

What's New

  1. Added support for over 15 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the following types of Hanwha analytics: Object Detection, IVA (Intelligent Video Analytics), Shock Detection, Defocus Detection, and Fog Detection.
  3. Added support for Synology Camera models BC500 and TC500. Configurations including image adjustment, People and Vehicle detection, and firmware updates are available in the IP Camera application.

Fixed Issues

  1. Fixed an issue where specific Dahua cameras cannot be added via Generic Dahua setup.

Version: 6.1.0-5081

(2023-03-14)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 6.1.0-5081 is only compatible with Surveillance Station 9.1.0-8660 and above.

What's New

  1. Added support for over 15 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the following types of Hanwha analytics: Object Detection, IVA (Intelligent Video Analytics), Shock Detection, Defocus Detection, and Fog Detection.
  3. Added support for Synology Camera models BC500 and TC500. Configurations including image adjustment, People and Vehicle detection, and firmware updates are available in the IP Camera application.

Fixed Issues

  1. Fixed an issue where specific Dahua cameras cannot be added via Generic Dahua setup.

Version: 6.0.3-4473

(2023-01-12)

Important Note

  1. Device Pack 6.0.3-4473 is updated on Jan 12 to fix the issues below:
    • Fixed the issue where certain Foscam and Reolink cameras might not function properly.
    • Fixed the issue where users might not receive event notifications of certain ONVIF cameras.

Compatibility & Installation

  1. Device Pack 6.0.3-4473 is only compatible with Surveillance Station 9.0.2 and above.

What's New

  1. Added support for over 26 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the new firmware version MX-V5.4.6.7 on Mobotix S16 cameras.
  3. Added support for the new firmware version A1D-500-V6.15.06-AC on ACTi I45 cameras.
  4. Added support for the new firmware version v1.1.0 on INSTAR IN-9408 cameras.
  5. Added support for the new firmware version v3.11.1 on Basler BIP2-1600C-DN cameras.

Version: 6.0.3-3473

(2023-01-12)

Important Note

  1. Device Pack 6.0.3-3473 is updated on Jan 12 to fix the issues below:
    • Fixed the issue where certain Foscam and Reolink cameras might not function properly.
    • Fixed the issue where users might not receive event notifications of certain ONVIF cameras.

Compatibility & Installation

  1. Device Pack 6.0.3-3473 is only compatible with Surveillance Station 9.0.2 and above.

What's New

  1. Added support for over 26 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the new firmware version MX-V5.4.6.7 on Mobotix S16 cameras.
  3. Added support for the new firmware version A1D-500-V6.15.06-AC on ACTi I45 cameras.
  4. Added support for the new firmware version v1.1.0 on INSTAR IN-9408 cameras.
  5. Added support for the new firmware version v3.11.1 on Basler BIP2-1600C-DN cameras.

Version: 6.0.3-4471

(2022-12-20)

Important Note

  1. This update has been recalled on Dec. 29, since certain Foscam and Reolink cameras might not function properly.

Compatibility & Installation

  1. Device Pack 6.0.3-4471 is only compatible with Surveillance Station 9.0.2 and above.

What's New

  1. Added support for over 26 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the new firmware version MX-V5.4.6.7 on Mobotix S16 cameras.
  3. Added support for the new firmware version A1D-500-V6.15.06-AC on ACTi I45 cameras.
  4. Added support for the new firmware version v1.1.0 on INSTAR IN-9408 cameras.
  5. Added support for the new firmware version v3.11.1 on Basler BIP2-1600C-DN cameras.

Fixed Issues

  1. Fixed the issue where users might not receive event notifications of certain ONVIF cameras.

Version: 6.0.3-3471

(2022-12-20)

Important Note

  1. This update has been recalled on Dec. 29, since certain Foscam and Reolink cameras might not function properly.

Compatibility & Installation

  1. Device Pack 6.0.3-3471 is only compatible with Surveillance Station 9.0.2 and above.

What's New

  1. Added support for over 26 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the new firmware version MX-V5.4.6.7 on Mobotix S16 cameras.
  3. Added support for the new firmware version A1D-500-V6.15.06-AC on ACTi I45 cameras.
  4. Added support for the new firmware version v1.1.0 on INSTAR IN-9408 cameras.
  5. Added support for the new firmware version v3.11.1 on Basler BIP2-1600C-DN cameras.

Fixed Issues

  1. Fixed the issue where users might not receive event notifications of certain ONVIF cameras.

Version: 6.0.2-4435

(2022-09-27)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 6.0.2-4435 is only compatible with Surveillance Station 9.0.2-10054 and above.

What's New

  1. Added support for over 25 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the new firmware version MX-V4.7.3.11-r4 on Mobotix M15D-Sec cameras.
  3. Added support for the new firmware version 41.7.1.80 on Milesight MS-C3763-PB, MS-C3763-FPB, MS-C3763-FIPB cameras.
  4. Added support for the new firmware version v3.1.0.976_22051212_v1.0.0.30 on Reolink RLC-823A cameras.

Fixed Issues

  1. Fixed the issue where Hikvision DS-2CD2086G2-I cameras might not connect normally.

Version: 6.0.2-3435

(2022-09-27)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 6.0.2-3435 is only compatible with Surveillance Station 9.0.2-8054 and above.

What's New

  1. Added support for over 25 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the new firmware version MX-V4.7.3.11-r4 on Mobotix M15D-Sec cameras.
  3. Added support for the new firmware version 41.7.1.80 on Milesight MS-C3763-PB, MS-C3763-FPB, MS-C3763-FIPB cameras.
  4. Added support for the new firmware version v3.1.0.976_22051212_v1.0.0.30 on Reolink RLC-823A cameras.

Fixed Issues

  1. Fixed the issue where Hikvision DS-2CD2086G2-I cameras might not connect normally.

Version: 6.0.1-4402

(2022-06-21)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 6.0.1-4402 is only compatible with Surveillance Station 9.0.0-7660 and above.

What's New

  1. Added support for over 70 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the wiper function on AXIS Q6215-lE cameras.
  3. Added support for the retrieve-on-schedule function of Edge Recording on Vivotek FD9380-H cameras.
  4. Added support for the new firmware version 0300a on Vivotek FD8136 cameras.

Fixed Issues

  1. Fixed the issue where users might not receive event notifications of certain Reolink cameras when using HTTPS connections.
  2. Fixed the issue where users might not receive event notifications of certain Hikvision cameras.
  3. Fixed the issue where the dewarped footage of Amcrest IP5M-F1180FW cameras might not display normally.
  4. Fixed the issue where the audio from Amcrest AD410 cameras might not output normally after playing for a while.

Version: 6.0.1-3402

(2022-06-21)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 6.0.1-3402 is only compatible with Surveillance Station 9.0.0-6860 and above.

What's New

  1. Added support for over 70 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the wiper function on AXIS Q6215-lE cameras.
  3. Added support for the retrieve-on-schedule function of Edge Recording on Vivotek FD9380-H cameras.
  4. Added support for the new firmware version 0300a on Vivotek FD8136 cameras.

Fixed Issues

  1. Fixed the issue where users might not receive event notifications of certain Reolink cameras when using HTTPS connections.
  2. Fixed the issue where users might not receive event notifications of certain Hikvision cameras.
  3. Fixed the issue where the dewarped footage of Amcrest IP5M-F1180FW cameras might not display normally.
  4. Fixed the issue where the audio from Amcrest AD410 cameras might not output normally after playing for a while.

Version: 6.0.0-4375

(2022-05-04)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 6.0.0 is only compatible with Surveillance Station 9.0.0-7656 and above.

What's New

  1. Added support for over 30 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for HTTPS secure connection between servers and compatible cameras.
  3. Added support for SRTP video encryption between servers and compatible AXIS, Bosch, and Hanwha cameras.
  4. Added support for the new firmware version 1.1.16 Build 211209 Rel.37726n (4555) and pan/tilt functions on Tapo C200 cameras.

Fixed Issues

  1. Fixed the issue where users might receive incorrect Device Pack version inconsistency messages when adding certain cameras to recording servers from the CMS host.
  2. Fixed the issue where the keyframe interval settings of certain ONVIF cameras might not be applied correctly.
  3. Fixed the issue where certain Vivotek cameras might trigger false events.
  4. Minor bug fixes.

Notes:

Version: 6.0.0-3375

(2022-05-04)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 6.0.0 is only compatible with Surveillance Station 9.0.0-6856 and above.

What's New

  1. Added support for over 30 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for HTTPS secure connection between servers and compatible cameras.
  3. Added support for SRTP video encryption between servers and compatible AXIS, Bosch, and Hanwha cameras.
  4. Added support for the new firmware version 1.1.16 Build 211209 Rel.37726n (4555) and pan/tilt functions on Tapo C200 cameras.

Fixed Issues

  1. Fixed the issue where users might receive incorrect Device Pack version inconsistency messages when adding certain cameras to recording servers from the CMS host.
  2. Fixed the issue where the keyframe interval settings of certain ONVIF cameras might not be applied correctly.
  3. Fixed the issue where certain Vivotek cameras might trigger false events.
  4. Minor bug fixes.

Notes:

Version: 5.8.6-4179

(2022-03-29)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 5.8.6-4179 is only compatible with Surveillance Station 8.2.11-7328 and above.

What's New

  1. Added support for over 30 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the new firmware version 1.1.16 Build 211209 Rel.37726n (4555) and pan/tilt functions on Tapo C200 cameras.

Fixed Issues

  1. Fixed the issue where users might receive incorrect Device Pack version inconsistency messages when adding certain cameras to recording servers from the CMS host.
  2. Fixed the issue where the keyframe interval settings of certain ONVIF cameras might not be applied correctly.
  3. Fixed the issue where certain Vivotek cameras might trigger false events.

Version: 5.8.6-3279

(2022-03-29)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 5.8.6--3279 is only compatible with Surveillance Station 8.2.11-6478 and above.

What's New

  1. Added support for over 30 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the new firmware version 1.1.16 Build 211209 Rel.37726n (4555) and pan/tilt functions on Tapo C200 cameras.

Fixed Issues

  1. Fixed the issue where users might receive incorrect Device Pack version inconsistency messages when adding certain cameras to recording servers from the CMS host.
  2. Fixed the issue where the keyframe interval settings of certain ONVIF cameras might not be applied correctly.
  3. Fixed the issue where certain Vivotek cameras might trigger false events.

Version: 5.8.5-4140

(2022-01-19)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 5.8.5-4140 is only compatible with Surveillance Station 8.2.10-7310 and above.

What's New

  1. Added support for over 40 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the new firmware version 4.49 on AXIS 212/215 PTZ cameras.
  3. Added support for the new firmware version 4.49 on AXIS 240Q video server.

Fixed Issues

  1. Minor bug fixes.

Version: 5.8.5-3240

(2022-01-19)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 5.8.5-3240 is only compatible with Surveillance Station 8.2.10-6468 and above.

What's New

  1. Added support for over 40 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the new firmware version 4.49 on AXIS 212/215 PTZ cameras.
  3. Added support for the new firmware version 4.49 on AXIS 240Q video server.

Fixed Issues

  1. Minor bug fixes.

Version: 5.8.4-4108

(2021-10-26)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 5.8.4-4108 is only compatible with Surveillance Station 8.2.10-7310 and above.

What's New

  1. Added support for over 80 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for Vivotek Smart VCA features, including Smart Motion Detection, Line Crossing Detection, Intrusion Detection, Loitering Detection, Face Detection, Crowd Detection, Missing Object Detection, Unattended Object Detection, and Running Detection.
  3. Added support for edge recording on Hikvision DS-2CD4C26FWD-A/DS-2CD4C26FWD-AP cameras and cameras added via the Generic Hikvision setup.
  4. Added support for the new firmware version 2.620.0000004.0.R on Dahua IPC-HDW1320S cameras.

Fixed Issues

  1. Fixed the issue where certain AXIS cameras might not be able to detect ACAP events after reconnecting.
  2. Enhanced the compatibility and video streaming stability of Netatmo cameras.
  3. Fixed the issue where the motion detection zone of certain cameras might be reset to panoramic view.

Version: 5.8.4-3208

(2021-10-26)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 5.8.4-3208 is only compatible with Surveillance Station 8.2.10-6468 and above.

What's New

  1. Added support for over 80 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for Vivotek Smart VCA features, including Smart Motion Detection, Line Crossing Detection, Intrusion Detection, Loitering Detection, Face Detection, Crowd Detection, Missing Object Detection, Unattended Object Detection, and Running Detection.
  3. Added support for edge recording on Hikvision DS-2CD4C26FWD-A/DS-2CD4C26FWD-AP cameras and cameras added via the Generic Hikvision setup.
  4. Added support for the new firmware version 2.620.0000004.0.R on Dahua IPC-HDW1320S cameras.

Fixed Issues

  1. Fixed the issue where certain AXIS cameras might not be able to detect ACAP events after reconnecting.
  2. Enhanced the compatibility and video streaming stability of Netatmo cameras.
  3. Fixed the issue where the motion detection zone of certain cameras might be reset to panoramic view.

Version: 5.8.3-4064

(2021-06-29)

Important Note

  1. The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 5.8.3-4064 is only compatible with Surveillance Station 8.2.9-7301 and above.

Fixed Issues

  1. Fixed the issue where certain Reolink cameras might stop recording after the system updates to Surveillance Station 8.2.9-7296.

  2. Minor bug fixes.

Version: 5.8.3-3163

(2021-06-23)

Important Note

  1. The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 5.8.3-3163 is only compatible with Surveillance Station 8.2.9-6459 and above.

What's New

  1. Added support for over 60 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the fixed-mount thermal imaging cameras FLIR A400, A500, and A700.
  3. Added support for AXIS Object Analytics.
  4. Added support for Reolink Smart Person/Vehicle Detection and Face Detection.
  5. Added support for ACTi Tampering Detection, Face Detection, Object Line Crossing Detection, and Object Enter Area Detection.
  6. Added support for the new firmware version v3.0.0.136_20121100 on Reolink RLC-410-5MP and RLC-410W-5MP cameras.
  7. Added support for two-way audio on INSTAR IN-8015HD cameras.
  8. Added support for audio output in G.726 format on certain cameras.

Fixed Issues

  1. Fixed the issue where the CMS host server might not load the correct camera functions when multiple cameras of the same brand were added via Generic setup and have the same or similar IP addresses.
  2. Fixed the issue where certain cameras that were added via ONVIF protocol cannot use the H.265 video format.

Version: 5.8.3-4063

(2021-06-01)

Important Note

  1. The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 5.8.3-4063 is only compatible with Surveillance Station 8.2.9-7296 and above.

What's New

  1. Added support for over 60 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the fixed-mount thermal imaging cameras FLIR A400, A500, and A700.
  3. Added support for AXIS Object Analytics.
  4. Added support for Reolink Smart Person/Vehicle Detection and Face Detection.
  5. Added support for ACTi Tampering Detection, Face Detection, Object Line Crossing Detection, and Object Enter Area Detection.
  6. Added support for the new firmware version v3.0.0.136_20121100 on Reolink RLC-410-5MP and RLC-410W-5MP cameras.
  7. Added support for two-way audio on INSTAR IN-8015HD cameras.
  8. Added support for audio output in G.726 format on certain cameras.

Fixed Issues

  1. Fixed the issue where the CMS host server might not load the correct camera functions when multiple cameras of the same brand were added via Generic setup and have the same or similar IP addresses.
  2. Fixed the issue where certain cameras that were added via ONVIF protocol cannot use the H.265 video format.

Version: 5.8.2-3110

(2021-01-26)

Important Note

  • The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  • Device Pack 5.8.2-3110 is only compatible with Surveillance Station 8.2.8-6335 and above.

What's New in Device Pack 5.8.2-3110

  1. Added support for over 150 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for Dahua Smart Motion Detection.
  3. Added support for audio output on AVTECH YGN2003 and YGN2003A cameras.

Fixed Issues

  • Fixed the issue where adding or editing Reolink cameras might fail or cause errors in settings.

Version: 5.8.1-3056

(2020-11-03)

Important Note

  • The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  • Device Pack 5.8.1 is only compatible with Surveillance Station 8.2.8 and above.

What's New in Device Pack 5.8.1

  1. Added support for over 80 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for the new firmware version v1.02 of D-Link DCS-8330LH cameras.
  3. Added support for the new firmware version V2.800.0000008.0.R of Dahua IPC-HDW5831R-ZE cameras.
  4. Added support for AXIS Guard Suite features, including Motion Guard, Fence Guard, and Loitering Guard.
  5. Added support for Hikvision Temperature Screening with face temperature measurement.
  6. Enhanced the accuracy of camera search in subnets.

Fixed Issues

  1. Fixed the issue where Wansview Q3S cameras can only add one preset position.
  2. Fixed the issue where using the default FPS value of certain ONVIF cameras might consume excessive memory.

Version: 5.8.0-3000

(2020-09-01)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.
  2. Device Pack 5.8.0-3000 is only compatible with Surveillance Station 8.2.8-6335 and above.

Fixed Issues

  1. Fixed the issue where certain cameras added via ONVIF protocol might consume excessive memory.
  2. Minor bug fixes.

Version: 5.8.0-2999

(2020-07-14)

Important Note

  • The update is expected to be available in all regions within the next few weeks. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  • Device Pack 5.8.0 is only compatible with Surveillance Station 8.2.8 and above.

What's New in Device Pack 5.8.0

  1. Added support for over 100 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.
  2. Added support for Dahua IVS (Intelligent Video Surveillance) features, including Face Detection, Tripwire, Intrusion, Object Abandoned, Object Missing, and Scene Change.
  3. Extended Hikvision Smart Event support. All cameras with Smart Event support, including those that were not added via Generic setup, can now enable the function on Surveillance Station.
  4. Added support for Dahua High Temperature Warning and Low Temperature Warning features.
  5. Added support for Edge Recording on multi-lens AXIS cameras, allowing each channel to save its recordings on the edge storage separately.
  6. Added support for Stream 3 on cameras added via Generic Dahua setup.
  7. Added support for ePTZ on Vivotek CC9381-HV, allowing each stream to operate ePTZ separately.
  8. Added support for Human Detection on FOSCAM cameras.
  9. Added support for adding multiple Hikvision DS-2CD63C2F-1 cameras with the same IP address, video mode, and mount type to Surveillance Station.
  10. Added support for connecting multiple Netamo cameras to Surveillance Station.

Fixed Issues

  1. Fixed the issue where Wanscam K64A cameras cannot be added to Surveillance Station via ONVIF protocol, and enhanced the compatibility with ONVIF cameras.
  2. Fixed the issue where D-Link 5222L cameras running a firmware version lower than 1.14.05601 cannot be added to Surveillance Station.
  3. Fixed the issue where ONVIF cameras might consume excessive memory.
  4. Fixed the issue where Stream 2 of Dahua IPC-HDBW2531R-ZS cameras might not be available when using PAL (Phase Alternating Line) as the TV standard.
  5. Fixed the issue where the highest resolution option of Foscam G4P cameras 2304×1536 was listed incorrectly as 2560×1440.
  6. Fixed the issue where cameras using Surveillance Station as the network time server cannot get the correct IP address of the connected Synology NAS/NVR if the server has multiple network interfaces.
  7. Fixed the issue where Hikvision DS-2CD2185FWD-IS cameras running a firmware version of 5.6.3 or above might not be able to receive event notifications by default.
  8. Fixed the issue where Dahua SD1A203T-GN cameras might not be able to output audio inputted from the microphone of Surveillance Station or DS cam.
  9. Fixed the issue where the authentication of Yoluke P1-4X cameras with the correct credentials might fail when they are being added to Surveillance Station via ONVIF protocol.

Version: 5.7.7-2943

(2020-01-14)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 5.7.7 is only compatible with Surveillance Station 8.2.7 and above.
  2. Added support for over 100 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.

New Features

  1. Integrated ONVIF Profile T for H.265 video format support.
  2. Added support for Hikvision Smart Events on cameras added via Generic Hikvision setup.
  3. Allows AXIS cameras to use supported ACAP applications on Surveillance Station after camera firmware updates.
  4. Added support for Generic D-Link camera setup to enhance device-function compatibility.
  5. Added support for the Audio Output function on D-Link DCS-6517B.
  6. Added support for the new firmware version 5.4.1 on Hikvision DS-2CD2142FWD-IWS and DS-2CD2142FWD-IS.

Version: 5.7.6-2854

(2019-10-01)

Important Note

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.

Compatibility & Installation

  1. Device Pack 5.7.6-2854 is only compatible with Surveillance Station 8.2.6 and above.
  2. Added support for over 120 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.

New Features

  1. Added support for the new firmware version v2.0.0.489_19072600 on Reolink RLC-423 5MP.
  2. Added support for the new firmware version 5.5.82 on HiLook IPC-T240H.
  3. Added support for the new firmware version 07.24000.01.07 on WansView Q3S-cloud.
  4. Added support for the built-in dewarping function on Dahua IPC-EBW81230.
  5. Added “4MP/5MP” as a suffix to certain Reolink camera model names for better clarity.

Fixed Issues

  1. Fixed the issue where certain Hikvision cameras might disconnect due to the exceeding the bitrate control range after firmware updates.
  2. Fixed the issue where certain ONFIV cameras with edge recording support might not be able to retrieve recordings from the edge storage.
  3. Fixed the issue where certain Dahua cameras cannot be added to Surveillance Station via Generic setup.
  4. Fixed the issue where certain TRENDnet cameras might not work properly after upgrading to Device Pack 5.7.5.

Version: 5.7.5-2824

(2019-07-30)

Important Note

  • The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.
  • Device Pack 5.7.5-2824 is only compatible with Surveillance Station 8.2.6 and above.

Device Support

  • Added support for over 100 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.

New Features

  • Added support for Reolink RLC-420 5MP.
  • Added support for selecting "Indoor" for exposure control.
  • Added support for showing the names of I/O modules in notification messages.

Version: 5.7.4-2774

(2019-05-28)

Compatibility and Installation

  1. Device Pack 5.7.4-2774 is only compatible with Surveillance Station 8.2.3 and above.

Device Support

  1. Added support for over 150 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.

New Features

  1. Added support for multi-stream function on AVTECH AVM571.

Fixed Issues

  1. Fixed an issue where AXIS intercom A8105-E might not receive notifications when events are triggered.

Version: 5.7.3-2740

(2019-02-19)

Compatibility and Installation

  1. Device Pack 5.7.3-2740 is only compatible with Surveillance Station 8.2.3 and above.

Device Support

  1. Added support for over 150 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.

New Features

  1. Added support for the new firmware version 5.5.80 on Hikvision DS-2CD2045FWD-I.
  2. Added support for the Perimeter Defender function on AXIS M3015-L and M3105-LVE.

Fixed Issues

  1. Fixed an issue where the number of preset positions might not be correct when cameras are set up via ONVIF protocol.
  2. Fixed an issue where Jovision cameras might not get the correct stream path when setting High profile stream.

Version: 5.7.2-2676

(2019-01-25)

Compatibility and Installation

  1. The update is expected to be available in all regions within the next few days. The actual time of release may vary slightly depending on the region.
  2. Device Pack 5.7.2-2676 is only compatible with Surveillance Station 8.2.3 and above.

Device Support

  1. Added support for over 180 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.

New Features

  1. Added support for the new firmware version 2.0.0.163_18081703 on Reolink RLC-422.
  2. Added support for the new firmware version 1.0.23-14-B1358 on Mintec MIT-IA300M.
  3. Added support for multi-lens on DAHUA l IPC-HDBW4231F-E2-M and IPC-HDBW4231F-E2-M12.
  4. Added support for video rotation on AMCREST IP2M-844EB.

Fixed Issues

  1. Fixed an issue where two-way audio might not work normally on Amcrest IP3M-941.
  2. Fixed an issue where settings might not be applied to Amcrest and Dahua cameras when the keyframe and frame rate are set at the same value.

Version: 5.7.1-2636

(2018-10-16)

Compatibility and Installation

  1. Device Pack 5.7.1-2636 is only compatible with Surveillance Station 8.2 and above.

Fixed Issues

  1. Fixed an issue where the PTZ functions of certain camera models might not work properly.

Version: 5.6.1-2481

(2018-10-02)

Compatibility and Installation

  1. Device Pack 5.6.1-2481 is only compatible with Surveillance Station 8.1.2 to 8.1.6.

New Features

  1. Added support for the new firmware version 2.14.1.118 on Foscam camera model FI9805E and FI9805W.
  2. Added support for the new firmware version 5.5.3 on HikVision camera model DS-2CD2185FWD-I.

Fixed Issues

  1. Fixed an issue where EWS1025CAM might fail to setup after the RTSP port is changed.
  2. Fixed an issue where Panasonic KX-HCM280 might fail to pass the connection test.
  3. Fixed an issue where ACTi E32A and D65A might fail to configure rotation settings with new camera firmware.
  4. Fixed an issue where Vivotek FD8379-HV might cause abnormal CPU usage.
  5. Fixed an issue where certain Axis camera models might fail to auto focus.
  6. Fixed an issue where certain cameras might fail to record due to abnormal storage status.

Version: 5.7.0-2635

(2018-09-13)

Compatibility and Installation

  1. Device Pack 5.7.0-2635 is only supported by Surveillance Station 8.2.0 and above.

Device Support

  1. All new support for AXIS IP Speaker including models C1004-E, C2005, and C3003-E. Please refer to Surveillance Station IP Speaker Support List for more information.

  2. Added support for over 580 new IP camera models. Please refer to Surveillance Station IP Camera Support List for more information.

New Features

  1. Added support for HJT audio output.

  2. Added support for INSTAR multi-window event detection.

  3. Added support for AXIS P5415-E PT and preset speed settings.

  4. Added support for Mobotix M15D-Sec 5MP and 6MP resolutions.

  5. Added support for the comprehensive function of some AXIS and Hikvision fisheye cameras.

Fixed Issues

  1. Fixed an issue where EWS1025CAM might fail to setup after the RTSP port is changed.

  2. Fixed an issue where AXIS I/O modules might display incorrect trigger status.

  3. Fixed an issue where ACTi E32A and D65A might fail to configure rotation settings with new camera firmware.

  4. Fixed an issue where G.726 cameras might not play sounds correctly when their order of bits are in little-endian format.

Version: 5.6.0-2478

(2018-04-10)

Compatibility and Installation

  1. Device Pack 5.6.0-2478 is only supported by Surveillance Station 8.1.0 and above.

Device Support

  1. Added support for over 30 new IP camera models. Please refer to the IP Camera Support List for more information.

New Features

  1. Added support for the zoom function of Avtech camera model AVM5547 and DGM1304.

  2. Added support for zoom, focus, auto focus, and iris functions of Samsung camera model SNZ-6320.

Fixed Issues

  1. Fixed an issue where D-Link camera model DCS-936L with the newest firmware version installed may not set up streaming settings properly.

  2. Fixed an issue where the audio output of Dahua camera model IPC-HDBW4431E-AS, IPC-HDBW4431F-AS, IPC-HFW4431B-AS, and IPC-HFW4431D-AS may not function properly.

  3. Fixed an issue where D-Link camera model DCS-7513B may not be installed on certain NAS models.

  4. Fixed an issue where the newest version of Perimeter Defender of AXIS ACAP may not detect correctly.

  5. Fixed an issue where TV standards cannot be set up properly when logging into AXIS cameras anonymously.

  6. Fixed an issue where motion detection of Reolink cameras may not function properly after the connection of the camera resumed.

Version: 5.5.1-2433

(2017-12-27)

Compatibility and Installation

  1. Device Pack 5.5.1-2433 is only compatible with Surveillance Station 8.1.0 and above.

New Features

  1. Added support for the PTZ speed adjustment function of AXIS generic API.

  2. Added support for 8 direction movement for BOSCH PTZ camera models.

Fixed Issues

  1. Fixed an issue where the “Test Connection” function on certain IQVISION camera models may not be executed correctly.

Version: 5.5.0-2432

(2017-12-12)

Compatibility and Installation

  1. Device Pack 5.5.0-2432 is only supported by Surveillance Station 8.1.0 and above.

Device Support

  1. Added support for over 320 new IP camera models. Please refer to the IP Camera Support List for more information.

  2. Added support for 4 Advantech I/O module models. Please refer to the I/O Module Support List for more information.

New Features

  1. Added support for an ACAP application, "Tailgating Detector" on AXIS camera models, and the connected functions between "Tailgating Detector" and the access controller card reader.

  2. Added support for the multiple streaming function of D-Link camera model DCS-5222L.

  3. Added support for Motion, Audio, and PIR detection of INSTAR camera models.

  4. Added support for the preset speed control function of AXIS camera models Q6055 and Q6055-E.

  5. Added support for the PTZ speed control function of AXIS camera models Q6054, Q6054-E and Q6115-E.

  6. Added support for the retrieve on schedule function in the edge recording function of AXIS camera model M2026-LE.

  7. Added support for Zoom, Focus, and Auto focus functions of Canon camera VB-S910F.

  8. Added support for Mirror and Flip functions of Levelone camera model FCS-6010.

Fixed Issues

  1. Enhanced the sensitivity of AXIS intercom cameras for doorbell detection.

  2. Enhanced the sensitivity of Hikvision camera models for event detection.

  3. Fixed an issue where camera models using Xiong Mai camera modules may not be installed properly under ONVIF.

  4. Fixed an issue where the audio output of Hikvision camera models with firmware 5.5 and above may not function properly.

  5. Fixed an issue where the multi-channel stream path of Panasonic camera model WJ-GXE500 may be incorrect.

  6. Fixed an issue where the digital input detection of Sony camera models may be incorrect.

  7. Fixed an issue where Trendnet camera models TV-IP342PI and TV-IP343PI may not be installed properly after updating to the latest firmware.

  8. Minor bug fixes.

Version: 5.3.3-2180

(2017-09-14)

Compatibility and Installation

  1. Device Pack 5.3.3-2180 is only compatible with Surveillance Station 8.0.0 to 8.0.7.

Fixed Issues

  1. Fixed an issue where UBIQUITI camera model airCam may not be installed properly.
  2. Fixed an issue where the Tampering Detection of Vivotek cameras may be auto enabled.
  3. Minor bug fixes.

Version: 5.4.0-2366

(2017-08-24)

Compatibility and Installation

  1. Device Pack 5.4.0-2366 is only supported by Surveillance Station 8.1.0 and above.

Device Support

  1. Added support for over 50 new IP camera models. Please refer to the IP Camera Support List for more information.

  2. Added support for Intercom Camera. Please refer to the IP Camera Support List for more information.

New Features

  1. Added generic camera API support from Amcrest to enhance future compatibility.

  2. Added support for the “Dynamic frame rate” function of AXIS camera models.

  3. Added support for H.265 video codec of Alphafinity camera models.

  4. Added support for H.265+ video codec of Hikvision camera models.

  5. Added support for the new firmware version 1.08_160629 of Samsung camera model SNH-P6410BN.

  6. Added support for the new firmware version 1.03_160922 of Samsung camera model SNH-E6440BN.

  7. Added support for the new firmware version 1.03.50 of Trendnet camera model TV-IP343PI.

  8. Added support for the new firmware version 1.2.2.B9 of Trendnet camera model TV-IP344PI and TV-IP345PI.

  9. Enhanced compatibility with ONVIF to support more ONVIF cameras.

  10. Increased the number of cameras that support AXIS Cross line detection.

Fixed Issues

  1. Fixed an issue where Event Detection of AXIS camera model M1031-W may not be triggered properly.

  2. Fixed an issue where UBIQUITI camera model airCam may not be installed properly.

  3. Fixed an issue where Tampering Detection of Vivotek camera models may not be disabled properly.

  4. Minor bug fixes.

Version: 5.3.2-2177

(2017-08-08)

Compatibility and Installation

  1. Device Pack 5.3.2-2177 is only compatible with Surveillance Station 8.0.0 and above.

New Features

  1. Added support for the new firmware version 1.24 of TP-Link camera model NC450.

  2. Increased the number of cameras with support for VMD3 and VMD4.

Fixed Issues

  1. Fixed an issue where event detection of certain Dahua camera models may not function properly.

  2. Fixed an issue where incorrect message alerts may appear when editing certain ONVIF cameras.

  3. Minor bug fixes.

Version: 5.3.1-2174

(2017-07-26)

Compatibility and Installation

  1. Device Pack 5.3.1-2174 is only compatible with Surveillance Station 8.0.0 and above.

Fixed Issues

  1. Fixed an issue where live feeds of user defined cameras may not be displayed properly when leaving the source path empty.

  2. Minor bug fixes.

Version: 5.3.0-2171

(2017-06-13)

Compatibility and Installation

  1. Device Pack 5.3.0-2171 is only supported by Surveillance Station 8.0.0 and above.

Device Support

  1. Added support for over 90 new IP camera models. Please refer to the IP Camera Support List for more information.

New Features

  1. Added support for "Video Motion Detection 4",  an ACAP application of AXIS camera models.

  2. Added support for the preset function of Dahua camera models IPC-A15 and IPC-A35.

  3. Added support for the RTSP over HTTP function of D-Link camera models DCS-6511 and DCS-6513.

  4. Added 3072x2048 resolution support for Moboitx camera model T25.

  5. Added support for “Audio Detection” of Foscam camera models C1 and FI9802P V2.

  6. Added support for the new firmware version 6.50.1 of AXIS camera model M3007-P.

  7. Added support for the new firmware version 5.4.4 of Hikvision camera model DS-2CD3310-I.

  8. Added support for the new firmware version v4.2/273 of IQinVision camera model series IQ865N.

Fixed Issues

  1. Fixed an issue where the force time synchronization of Avtech, Hikvision, and other camera brands may not function properly in daylight saving time.

  2. Fixed an issue where the streaming settings of Dahua camera model 2320R series may not be operated properly.

  3. Fixed an issue where Vivotek camera models FD8369A-V, IB8369A, and FD8169A may receive streams from other cameras when the transport potocal of RTSP is set to UDP.

  4. Fixed an issue where the time synchronization may not function properly when Surveillance Station is in a multiple subnet environment and set as Network Time Server of cameras.

  5. Fixed an issue where Vivotek cameras may be disconnected when the detection source of Audio Detection or Tampering Detection is set to be by camera.

Version: 5.2.0-2131

(2017-03-22)

Compatibility and Installation

  1. Device Pack 5.2.0-2131 is only compatible with Surveillance Station 8.0.0 and above.

Device Support

  1. Added support for over 140 new IP camera models. Please refer to the IP Camera Support List for more information.

New Features

  1. Added generic camera API support from DAHUA to enhance the compatibility of its upcoming surveillance product models.
  2. Added AXIS generic camera API support for ACAP, Zipstream, Dynamic keyframe interval, and Multi-channel functions.
  3. Added Hikvision generic camera API support for H.264+ video codec.
  4. Added 1280x800 and 1024x640 resolution support for AXIS P3364-V, P3364-VE, P3364-LV, and P3364-LVE.
  5. Added support for Speed Dry function of AXIS cameras.
  6. Added support for Multiple Stream function of D-Link DCS-6651 and LevelOne FCS-5051.
  7. Added support for Audio Output function of D-Link 2230L.
  8. Added support for Zoom, Focus, Multiple Stream, and Digital Output functions of SMAX GU1.
  9. Added support for Force Time Synchronization function of MOBOTIX, INSTAR, Panasonic, and TRENDNet cameras.
  10. Added support for Force Restart function of MOBOTIX, INSTAR, Panasonic, and TRENDNet cameras.

Fixed Issues

  1. Fixed an issue where H.265 video codec may not be used in DAHUA IPC-HDBW5231E-Z.

  2. Fixed an issue where audio detection of D-Link may not function properly in "Keep original camera settings".

Version: 4.5.1-1355

(2017-02-14)

Compatibility and Installation

  1. Device Pack 4.5.1 is only supported by Surveillance Station 7.2.1-4602 and above.

Fixed Issues

  1. Fixed an issue where select D-Link cameras may have no audio in Live View.
  2. Fixed an issue where the digital input of iPUX ICS2330 may not function normally.
  3. Fixed an issue where AXIS F44 may be disconnected after the video channel Quad is selected.

Version: 5.1.0-2107

(2017-01-18)

Compatibility and Installation

  1. Device Pack 5.1.0-2107 is only compatible with Surveillance Station 8.0.0 and above.

Device Support

  1. Added support for over 130 new IP camera models. Please refer to the IP Camera Support List for more information.
  2. Added support for AXIS A9188 I/O module models. Please refer to the I/O Module Support List for more information.

New Features

  1. Added support for wiper function of AXIS cameras and wiper/LED function of selected Bosch cameras.
  2. Added support for Smart Stream function of Vivotek cameras.
  3. Added support for audio detection of Vivotek cameras.
  4. Added support for force restart and force time synchronization features of AVTech, ACTi and Samsung cameras.

Version: 4.5.0-1348

(2016-11-24)

Compatibility and Installation

  1. Device Pack 4.5.0 is supported by Surveillance Station 7.2.1-4602 and above.

What's New

  1. Added support for over 300 new camera models, including ACTi, Amcrest, AXIS, D-Link, Dahua, Foscam, TRENDnet, Zavio. More than 5100 models of IP cameras are supported now. Please refer to the Surveillance Station IP Camera Support List for more information.
  2. Added support for new firmware of Axis P1428-E, D-Link DCS-2332L, Hikvision DS-2CD2942F-I(W)S and Maginon IPC-20C camera models.
  3. Added support for "Auto Pan" of Amcrest PTZ camera models.
  4. Added support for the two-way audio feature of certain ACTi, D-Link, and Hikvision cameras.

Fixed Issues

  1. Fixed an issue where the time zone of certain Foscam cameras may change after modification of NTP server setting.
  2. Fixed an issue where Maginon IPC-25HDC camera model's unsupported 1280x720 resolution in MJPEG codec could still be selected.
  3. Fixed an issue where the exposure control of certain Airlive cameras may change after modification of camera settings.

Version: 5.0.0-2055

(2016-10-21)

Compatibility and Installation

  1. Device Pack 5.0.0-2055 is only compatible with Surveillance Station 8.0.0 and above.
  2. Ended support for PSIA protocol.

What's New

  1. Added support for over 150 new camera models, including ACT, AXIS, D-Link, DAHUA, Foscam, Vivotek. More than 5000 models of IP cameras are supported now. Please refer to the Surveillance Station IP Camera Support List for more information.
  2. Added support for H.265 video codec for certain cameras.
  3. Added support for ACAP official suites of AXIS camera models, including Perimeter Defender, Digital Autotracking, Cross Line Detection, and Video Motion Detection.
  4. Added support for camera's PIR motion detection.
  5. Added support for H.264+ video codec of Hikvision camera models.
  6. Added support for Smart Codec function of Zavio camera models.
  7. Added support for the two-way audio feature of certain ACTi, D-Link, and Hikvision cameras.
  8. Added support for new firmware of Axis P1428-E and D-Link DCS-2332L camera models.
  9. Added support for the speed configuration of pan and tilt on Edimax PTZ camera models.

Fixed Issues

  1. Fixed an issue where Maginon IPC-25HDC camera model's unsupported 1280x720 resolution in MJPEG codec could still be selected for such model.
  2. Fixed an issue where the exposure control of certain Airlive cameras may change after modification of camera settings.
  3. Fixed an issue where the time zone of certain Foscam cameras may change after modification of NTP server setting.
  4. Fixed an issue where certain cameras may be cleared of preset positions after added to Surveillance Station.

Version: 4.4.0-1321

(2016-10-13)

Compatibility and Installation

  1. Device Pack 4.4.0-1321 is only supported by Surveillance Station 7.2.1-4602 and above.

What's New

  1. Added support for over 130 new camera models, including ACTi, AXIS, Canon, D-Link, Hikvisioin, LILIN, Zavio. More than 4900 models of IP cameras are supported now. Please refer to the Surveillance Station IP Camera Support List for more information.
  2. Added support for multiple channels of Panasonic WJ-GXE500 camera models.
  3. Added support for new firmwares of certain Foscam cameras.
  4. Added support for new firmwares of Maginon IPC-100AC camera.
  5. Added support for audio detection for Amcrest cameras.

Fixed Issues

  1. Fixed an issue where certain LILIN camera models may be temporarily disconnected after modification of camera configuration.
  2. Fixed an issue where the edge storage configuration of AXIS camera models may fail under certain circumstances.

Version: 3.8-0898

(2016-08-18)

Compatibility and Installation

  1. Device Pack 3.8-0898 is supported by Surveillance Station 7.1-3995 and above.

What's New

  1. Added support for new firmwares of certain Foscam cameras.

Fixed Issues

  1. Fixed an issue where the motion detection may fail on the ABUS TVIP92xxx series IP cameras.
  2. Fixed an issue where the pan/tilt may function at the opposite positions on Heden CAMHP6IPWE IP cameras.
  3. Fixed an issue where the authentication may fail after a long-time usage of Advantech I/O modules.

Version: 4.3.0-1313

(2016-08-02)

Compatibility and Installation

  1. Device Pack 4.3.0-1313 is supported by Surveillance Station 7.2.1-4602 and above.

What's New

  1. Added support for over 80 new camera models, including AXIS, Alphafinity, D-Link, Eneo, Foscam, LILin, Maginon, SHARP. More than 4700 models of IP cameras are supported now. Please refer to the Surveillance Station IP Camera Support List for more information.
  2. Added support for I/O module models of Advantech ADAM-6060 and ADAM-6066.
  3. Added support for the two-way audio feature of HJT cameras.
  4. Added support for wall and floor mounted settings for the camera model of Vivoteck FE8180.

Fixed Issues

  1. Fixed an issue where the motion detection may fail on the ABUS TVIP92xxx series IP cameras.
  2. Fixed and issue where configuring video channels may fail on IP cameras of Hikvision DS-2CD6362F-I(V)(S).
  3. Fixed an issue where the pan/tilt feature may function at the opposite positions on IP cameras of Heden CAMHP6IPWE.
  4. Fixed an issue where the authentication failure may occur when using Advantech I/O modules after a long period of time.

Version: 3.8-0896

(2016-06-28)

Compatibility and Installation

  1. Device Pack 3.8-0896 is supported by Surveillance Station 7.1-3995 and above.

Fixed Issues

  1. Fixed the compatibility issue for D-Link DCS-5615 and Panasonic WV-ST165 with newer firmwares.
  2. Fixed an issue where, under a few circumstances, the setup of the parameters for Motion Detection may fail on Canon VS-C60 model.
  3. Fixed an issue where the motion detection of certain D-Link cameras may be wrongly continuously triggered.
  4. Fixed an issue where the time zone settings for certain Foscam cameras may be wrongly reset to default.
  5. Minor bug fixes.

Version: 4.2.0-1303

(2016-06-21)

Compatibility and Installation

  1. Device Pack 4.2.0-1303 is supported by Surveillance Station 7.2.1-4602 and above.

What's New

  1. Added support for over 300 new camera models, including ABUS, Airlive, Alphafinity, AMCREST, AXIS, DAHUA, EDIMAX, HIKVISION, Hunt, IQinVision, LTS, Vivotek, et cetera. More than 4700 models of IP cameras are supported now. Please refer to the Surveillance Station IP Camera Support List for more information.
  2. Added support for new camera brands including Alphafinity, AMCREST, and LTS. More than 90 vendors of IP cameras are supported now. Please refer to the Surveillance Station IP Camera Support List for more information.
  3. Added generic camera API support from HikVision to enhance the compatibility of its upcoming surveillance product models.
  4. Added support for the periodic time synchronization for AXIS, D-Link, Foscam, Vivotek, Duhua, HIKVISION, and ONVIF cameras.
  5. Added support for the periodic restart for AXIS, D-Link, Foscam, Vivotek, Duhua, HIKVISION, and ONVIF cameras.
  6. Added support for the auto switch lens for Mobotix MX-S15D-Sec dual-lens camera.
  7. Added support for original view of all streams for specific Vivotek fisheye cameras.
  8. Added support for digital output for INSTAR HD series cameras.

Version: 4.1.0-1268

(2016-03-29)

Compatibility and Installation

  1. Device Pack 4.1.0-1268 is supported by Surveillance Station 7.2.1-4602 and above.

What's New

  1. Added support for over 300 new camera models, including AXIS, D-Link, DivioTec, HikVision, Vivotek, et cetera. More than 4300 models of IP cameras are supported now. Please refer to the Surveillance Station IP Camera Support List for more information.
  2. Added support to adjust keyframe interval for HikVision, Vivotek, Foscam, and Dahua cameras to enhance the flexibility between streaming quality and network bandwidth.
  3. Enhanced the compatibility of AXIS cameras, including the setting of dynamic keyframe interval; the settings of motion detection area and history are configurable when the cameras are set as the detection source.
  4. Added support for the periodic restart of cameras to stabilize their connectivity.
  5. Added support for PTZ speed adjustment for certain Vivotek cameras.
  6. Added support for the periodic time synchronization for AXIS cameras to keep their time consistent with that of Surveillance Station.

Fixed Issues

  1. Fixed an issue where the time zone may be reset to default in certain Foscam cameras.

Version: 3.8-0894

(2016-03-21)

Compatibility and Installation

  1. Device Pack 3.8-0894 is supported by Surveillance Station 7.1-3995 and above.

What's New

  1. Added support for new camera models from Zavio. Please refer to the Surveillance Station Camera Support List for more information.

Fixed issue

  1. Fixed an issue where batch adding ONVIF cameras may fail under certain conditions.
  2. Fixed an issue where certain ONVIF cameras may use too much memory.

Version: 4.0.0-1230

(2016-01-21)

Compatibility and Installation

  1. Device Pack 4.0.0-1230 is supported by Surveillance Station 7.2.0-4551 and above.

What’s New

  1. Added support for Intel 64-bit architecture.
  2. Added support for I/O modules of Advantech ADAM-6266.
  3. Added support for more than 10 new cameras including ABUS, AXIS, D-Link, HikVision, Zavio. Please refer to the Surveillance Station IP Camera Support List for more information.

Fixed issue

  1. Enhanced the stability and security for Device Pack.

Version: 3.7-0890

(2016-01-12)

Compatibility and Installation

  1. Device Pack 3.7-0890 is supported by Surveillance Station 7.1-3995 and above.

What's New

  1. Added support for I/O modules of Advantech ADAM-6050, ADAM-6052, ADAM-6250 and AXIS P8221.
  2. Enhanced surveillance features by adding support for GOV settings in AXIS cameras, and the auto-pan function in the cameras connected to an AXIS video server.
  3. Added support for cameras of Brickcom 300/500 series with 3.7.X firmware.
  4. Added support for more than 120 new camera brands including AXIS, Brickcom, Dynacolor, HJT, INSTAR. More than 3900 models of IP cameras are supported now. Please refer to the Surveillance Station IP Camera Support List for more information.

Version: 3.6-0871

(2015-12-10)

Compatibility and Installation

  • Device Pack 3.6-0871 is only compatible with Surveillance Station 7.1-3995 or later.

What's New

  • Added support for more than 10 new camera models including: Axis, Bosch, Ezviz, Foscam, Vivotek. Please refer to the Surveillance Station Camera Support List for more information.

Fixed issue

  • Correct the model name from ICZ23 to ICZX230 for the brand HJT

Version: 3.5-0859

(2015-11-12)

Compatibility and Installation

  1. Device Pack 3.5-0859 is only compatible with Surveillance Station 7.1-3995 or later.

What's New

  1. Added generic camera APIs support from Axis & Bosch to enhance future compatibility.
  2. Enhanced camera search feature to discover all ONVIF Profile S compliant devices within the same local network.
  3. Added ONVIF Profile G to support edge recording.
  4. The home position in PTZ cameras can now be customized.
  5. Added H.264 & MPEG4 video formats for user-defined cameras.
  6. Added codec optimization for Axis cameras and others to reduce the streaming bandwidth without image quality dropped.
  7. Added keep_alive method setting to manually enhance the camera compatibility for RTSP streaming.
  8. Added support for more than 400 new camera models including: Arecont Vision, Vivotek, Hikvision, TrendNet and others. More than 3,700 camera models in total are now supported. Please refer to the Surveillance Station Camera Support List for more information.

Version: 3.4-0674

(2015-10-12)

Compatibility and Installation

  1. Device Pack 3.4-0674 is only compatible with Surveillance Station 7.0-3775 or later.

Fixed Issues

  1. Fixed an issue where certain Foscam cameras cannot be connected by correcting the RTSP port.
  2. Fixed an issue where stream 2 configuration of D-Link DCS-6010L cannot be set successfully through Surveillance Station.

Version: 3.4-0671

(2015-07-06)

Compatibility and Installation

  1. Device Pack 3.4-0671 is only compatible with Surveillance Station 7.0-3775 or later.

What's New

  1. Added support for more than 170 new camera models including: Axis, D-Link, Dahua, Foscam, Hikvision, MicroView, Mintec, MOBOTIX, Samsung, and TRUEN. More than 3,300 camera models in total are now supported. Please refer to the Camera Support List on Synology Website.
  2. Added edge recording and audio output support for more Axis cameras.

Fixed Issues

  1. Fixed a memory issue when a user configures Motion Detection from camera with ONVIF.

Version: 3.2-0628

(2015-04-21)

Compatibility and Installation

  • Device Pack 3.2­0628 is only compatible with Surveillance Station 7.0­3762 or later.

What’s new

  • Added support for more than 100 new camera models including: ABUS, Aztech, Dynacolor, and Panasonic. More than 3,200 camera models in total are now supported. Please refer to the Surveillance Station IP Camera Support List for more information.
  • Supported corridor view for Vivotek camera (IP8155HP).
  • Supported single len installation in MOBOTIX multi­lens camera.

Fixed Issues

  • Fixed an issue that some camera’s time zone configuration may be error.

Version: 3.1-0582

(2015-02-03)

Compatibility and Installation

  • Device Pack 3.1-0582 is only compatible with Surveillance Station 7.0-3742 orlater.

What's New

  • Added support for more than 250 new camera models including: Bosch, Vivotek, Sentry360, and TrendNet. More than 3,100 camera models in total are now supported. Please refer to the Surveillance Station IP Camera Support List for more information.
  • Device Pack 3.1-0582 is now ONVIF 2.4 compliant.Improved ONVIFsupport for the following features:
    1. Multiple streams
    2. Constant bit rate control
    3. Two-way audio
    4. Digital Input/Output
    5. Motion Detection by camera
    6. Audio/Tampering detection
    7. Video optimization with NTP and day/night mode
    8. Enhanced PTZ operation to 8 directions

Version: 2.5-0454

(2014-11-11)

Compatibility and Installation

  1. Device Pack 2.5-0454 is only compatible with Surveillance Station 6.3-3364 and onward on DSM 5.0.

What's New

  1. More than 160 new camera models have been added from Axis, Bosch, Sony, Nexcom. Now supports more than 3000 camera models in total. Please refer to the Camera Support List on Synology Website.

Version: 2.1-0242

(2014-04-09)

Fixed Issues

  1. Unstable connection between certain cameras and Surveillance Station.
  2. Some Panasonic cameras produce grey display in live view and recording.
  3. Current HTTP digest mechanism could cause disconnections for certain cameras.

Version: 1.1-0116

(2014-03-10)

Compatibility and Installation

  1. Device Pack 1.1-0116 is only compatible with Surveillance Station 6.1-2976 and onward on DSM 4.0.

Version: 2.0-0219

(2014-01-23)

Compatibility and Installation

  1. Device Pack 2.0-0219 is only compatible with Surveillance Station 6.2 and onward on DSM 5.0. Please download DSM 5.0 for full camera support of your Surveillance Station.

What's New

  1. More than 540 new camera models have been added from Axis, Bosch, Canon, Dahua, Hikvision, and INSTAR. Now supports more than 2327 camera models in total. Please refer to the Camera Support List on Synology Website.

Version: 1.0-0071

(2013-11-27)

Compatibility and Installation

  1. Device Pack 1.0-0071 is only compatible with Surveillance Station 6.1-2941 and onward on DSM 4.0.

Version: 1.0-0045

(2013-10-17)

Compatibility and Installation

  1. Device Pack 1.0-0045 is only compatible with Surveillance Station 6.1-2909 and onward on DSM 4.0.