Release Notes for RT6600ax
Version: 1.3.1-9346 Release Candidate
Important notes
This version is the release candidate (RC) of SRM 1.3.1.
What's New
- Supports a new installation wizard.
- Revamped login style page.
- Supports VLAN and other relevant SRM 1.3 functions for RT2600ac and MR2200ac.
- Supports utilizing RT2600ac as a Wi-Fi point in a mesh Wi-Fi system.
- Supports compatibility of mesh Wi-Fi system between RT6600ax, RT2600ac, and MR2200ac.
- Improved device startup speed.
- Improved accuracy of device name recognition.
Fixed Issues
- Fixed the issue where DoH might get incorrect IP addresses.
- Fixed the issue where the IGMP proxy version might be incorrect.
- Fixed the issue where DDNS might not update automatically.
- Fixed the issue where encrypted folders might not open correctly.
- Fixed the issue where DHCP might fail to add new reserved clients.
- Fixed multiple security vulnerabilities (Synology-SA-22:09).
- Fixed an issue where the Wi-Fi connection may not be stable when an RT2600ac was added to the mesh Wi-Fi system.
- Fixed an issue where an IPv6 network may not work normally when a KPN profile was in use.
- Adjusted the MR2200ac's light intensity display rules.
- Minor bug fixes.
Known Issues and Limitations
- MR2200ac with SRM 1.2 or earlier is not compatible with RT6600ax in a mesh Wi-Fi system.
- SRM 1.3 and above are only compatible with DS router 2.0 and above.
- Wireless Repeater mode (WDS mode) is not supported.
- Restoring configurations between SRM 1.2 and SRM 1.3 is not supported.
- Smart Connect Scheme is not supported.
- Wi-Fi Performance Test is not supported.
- Cloud Station is not supported.
Version: 1.3-9193 Update 1
Important Note
The update will be available for selected regions within the following weeks, although the release time in each region may vary slightly.
Fixed Issues
- Fixed multiple security vulnerabilities regarding Netatalk (Synology-SA-22:06).
- Fixed the issue where the IGMP proxy might not work properly with the ISP profile (Telfort, XS4ALL, and KPN).
- Fixed the issue where SRM might reset the firewall rules of Site-to-Site VPN.
- Minor bug fixes.
Version: 1.3-9193
Important Note
The update will be available for selected regions within the following weeks, although the release time in each region may vary slightly.
What's New
- Supports splitting multiple local networks (VLANs), applying independent network settings to each VLAN, and creating trunk ports on the primary network.
- Added support for mDNS protocol on all local area networks.
- Support configuring independent firewall rules for each local area network.
- Added Ethernet port status display to Network Center.
- Supports configuring independent QoS settings for each local area network.
- Supports bridging Wi-Fi SSID with existing VLAN ID to extend wireless networks when the router is in wireless AP mode.
- Supports setting corresponding SSIDs for different local area networks (VLAN).
- Added a new Wi-Fi Client page to Wi-Fi Connect.
- Supports using Google Account and Apple ID to sign in to Synology Account.
Known Issues and Limitations
- MR2200ac with SRM 1.2 or earlier is not compatible with RT6600ax in a mesh Wi-Fi system.
- SRM 1.3 is only compatible with RT6600ax; support for RT2600ac and MR2200ac will be added in an upcoming release.
- SRM 1.3 and above are only compatible with DS router 2.0 and above.
- Wireless Repeater mode (WDS mode) is not supported.
- Restoring configurations between SRM 1.2 and SRM 1.3 is not supported.
- Smart Connect Scheme is not supported.
- Wi-Fi Performance Test is not supported.
- Extended NSS is not supported.
- Cloud Station is not supported.
Version: 1.3.1-9346 Release Candidate
Important notes
This version is the release candidate (RC) of SRM 1.3.1.
What's New
- Supports a new installation wizard.
- Revamped login style page.
- Supports VLAN and other relevant SRM 1.3 functions for RT2600ac and MR2200ac.
- Supports utilizing RT2600ac as a Wi-Fi point in a mesh Wi-Fi system.
- Supports compatibility of mesh Wi-Fi system between RT6600ax, RT2600ac, and MR2200ac.
- Improved device startup speed.
- Improved accuracy of device name recognition.
Fixed Issues
- Fixed the issue where DoH might get incorrect IP addresses.
- Fixed the issue where the IGMP proxy version might be incorrect.
- Fixed the issue where DDNS might not update automatically.
- Fixed the issue where encrypted folders might not open correctly.
- Fixed the issue where DHCP might fail to add new reserved clients.
- Fixed multiple security vulnerabilities (Synology-SA-22:09).
- Fixed an issue where the Wi-Fi connection may not be stable when an RT2600ac was added to the mesh Wi-Fi system.
- Fixed an issue where an IPv6 network may not work normally when a KPN profile was in use.
- Adjusted the MR2200ac's light intensity display rules.
- Minor bug fixes.
Known Issues and Limitations
- MR2200ac with SRM 1.2 or earlier is not compatible with RT6600ax in a mesh Wi-Fi system.
- SRM 1.3 and above are only compatible with DS router 2.0 and above.
- Wireless Repeater mode (WDS mode) is not supported.
- Restoring configurations between SRM 1.2 and SRM 1.3 is not supported.
- Smart Connect Scheme is not supported.
- Wi-Fi Performance Test is not supported.
- Cloud Station is not supported.
Version: 1.3-9193 Update 1
Important Note
The update will be available for selected regions within the following weeks, although the release time in each region may vary slightly.
Fixed Issues
- Fixed multiple security vulnerabilities regarding Netatalk (Synology-SA-22:06).
- Fixed the issue where the IGMP proxy might not work properly with the ISP profile (Telfort, XS4ALL, and KPN).
- Fixed the issue where SRM might reset the firewall rules of Site-to-Site VPN.
- Minor bug fixes.
Version: 1.3-9193
Important Note
The update will be available for selected regions within the following weeks, although the release time in each region may vary slightly.
What's New
- Supports splitting multiple local networks (VLANs), applying independent network settings to each VLAN, and creating trunk ports on the primary network.
- Added support for mDNS protocol on all local area networks.
- Support configuring independent firewall rules for each local area network.
- Added Ethernet port status display to Network Center.
- Supports configuring independent QoS settings for each local area network.
- Supports bridging Wi-Fi SSID with existing VLAN ID to extend wireless networks when the router is in wireless AP mode.
- Supports setting corresponding SSIDs for different local area networks (VLAN).
- Added a new Wi-Fi Client page to Wi-Fi Connect.
- Supports using Google Account and Apple ID to sign in to Synology Account.
Known Issues and Limitations
- MR2200ac with SRM 1.2 or earlier is not compatible with RT6600ax in a mesh Wi-Fi system.
- SRM 1.3 is only compatible with RT6600ax; support for RT2600ac and MR2200ac will be added in an upcoming release.
- SRM 1.3 and above are only compatible with DS router 2.0 and above.
- Wireless Repeater mode (WDS mode) is not supported.
- Restoring configurations between SRM 1.2 and SRM 1.3 is not supported.
- Smart Connect Scheme is not supported.
- Wi-Fi Performance Test is not supported.
- Extended NSS is not supported.
- Cloud Station is not supported.