E10G18-T1

Single-port, high-speed 10GBASE-T/NBASE-T add-in card for Synology NAS servers

Flexible and economic solution for 10GbE adoption

Equipped with an RJ-45 connector and supports IEEE 802.3an/bz (10GBASE-T/NBASE-T) and 802.3x, E10G18-T1 helps you smoothly migrate to a 10GbE networking environment with your existing infrastructure. Supporting backward compatibility and auto-negotiation between 10Gbps, 5Gbps, 2.5Gbps, 1Gbps, and 100Mbps, E10G18-T1 is an economic solution to overcome the data transmission bottleneck for small businesses and home users.

5 year warranty

Built to handle intensive workloads, Synology network add-in-cards are backed by Synology's 5 year limited warranty.

General Specifications
Standards
  • IEEE 802.3an 10Gbps Ethernet
  • IEEE 802.3bz 2.5Gbps/ 5Gbps Ethernet
  • IEEE 802.3ab Gigabit Ethernet
  • IEEE 802.3u Fast Ethernet
  • IEEE 802.3x Flow Control
Data Transfer Rates 10 Gbps
Network Operation Mode Full Duplex
Supported Features
  • 9 KB Jumbo Frame
  • TCP/UDP/IP Checksum Offloading
  • Auto-negotiation between 100Mb/s, 1Gb/s, 2.5Gb/s, 5Gb/s, and 10Gb/s
Applied Models
  • FS3017
  • FS2017
  • FS1018
  • RS18017xs+
  • RS18016xs+
  • RS10613xs+
  • RS4017xs+
  • RS3618xs
  • RS3617xs+
  • RS3617RPxs
  • RS3617xs
  • RS3614xs+
  • RS3614RPxs
  • RS3614xs
  • RS3413xs+
  • RS3412RPxs
  • RS3412xs
  • RS3411RPxs
  • RS3411xs
  • RS2818RP+
  • RS2418RP+
  • RS2418+
  • RS1619xs+
  • RS1219+
  • RS818RP+
  • RS818+
  • RC18015xs+
  • DS3617xs
  • DS3615xs
  • DS3612xs
  • DS3611xs
  • DS3018xs
  • DS1819+
  • DS1817+
  • DS1618+
  • DS1517+
Note DSM version requirement: 6.2-23739-2 onward (or 6.1-15284-2 onward with DSM 6.1)
Hardware Specifications
PCIe Interface PCIe 3.0 x4
Bracket Height Low Profile and Full Height
Size (Height x Width x Depth) 86.0 mm x 68.1 mm x 13.6 mm
Operating Temperature 0°C to 40°C (32°F to 104°F)
Storage Temperature -20°C to 60°C (-5°F to 140°F)
Relative Humidity 5% to 95% RH
Warranty 5 Years