What do the LED indicators on my Synology Router mean?

What do the LED indicators on my Synology Router mean?

Details

This article illustrates the eight patterns of the Status indicator on your Synology Router:

Ready for setup

Blinking blue
Solid green
Blinking green
RT6600ax
v
WRX560
v
RT2600ac
v (SRM 1.2)
v (SRM 1.3)
MR2200ac
v
RT1900ac1
v

This means your Synology Router is ready for first time setup. You can your device up as part of a mesh Wi-Fi system. Alternatively, you can also set it up as a router by establishing a network connection via your computer or the mobile application DS router.

System starting

Solid blue
Solid orange
Blinking green
RT6600ax
v
WRX560
v
RT2600ac
v
MR2200ac
v
RT1900ac
v

Your Synology Router is booting up.

Powered on (system normal)

The Status indicator is solid green.

Your Synology Router is ready for use.

Mesh network disconnected

Blinking orange
Solid red
RT6600ax
v
WRX560
v
RT2600ac
v
MR2200ac
v

This router is disconnected from the mesh Wi-Fi system.

Error

The Status indicator is solid red.

The router might have been disconnected from the mesh system because of a weak wireless signal. To fix the connection issue, follow the below steps:

  1. Remove the device by going to SRM > Wi-Fi Connect > Wi-Fi Point.
  2. Place your Synology Router in a suitable location (see this article for detailed instructions).
  3. Add your Synology Router to the mesh system again (see this article for detailed instructions).

No Power

The Status indicator is off.

Please make sure the adapter is properly connected between the router and the outlet.

Finding device

Blinking green/orange
Blinking green

RT6600ax

v

WRX560

v

RT2600ac

v

MR2200ac2

v

If you click on the Blink to Find button in SRM > Wi-Fi Connect > Wi-Fi Point > Manage, the LED indicators will blink continuously for 2 minutes.

Syncing setting

Blinking green

MR2200ac3

v

The router is syncing the settings. Please wait until the LED indicators signal ready for use status.

Notes:

  1. The mesh Wi-Fi system is not supported on the RT1900ac.
  2. The Status indicator and Wi-Fi indicators will blink simultaneously.
  3. The Status indicator and Wi-Fi indicators will blink in turn.
Ready for setup
System starting
Powered on (system normal)
Mesh network disconnected
Error
No Power
Finding device
Syncing setting